86613-3S000 / 86614-3S000 Rear Bumper Bracket for Hyundai Sonata ’11-’13

Rear Bumper Bracket for Hyundai Sonata ’11-’13: Use the model label as a starting point, then verify the actual mounting layout on the vehicle. The component belongs to the bumper inspection group.

Product Specifications

Technical Comparison Notes

This rear bumper bracket is associated with Hyundai Sonata ’11-’13. Treat 86613-3S000 / 86614-3S000 as an identification route, then validate the component at the actual mounting area. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Application Review

• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing

The parts coordinator should trace lamp or grille openings, measure side-retainer engagement, and note bracket and bolt-hole spacing before the repair schedule is finalized. This route applies to the rear bumper bracket shown for Hyundai Sonata ’11-’13.

If images accompany the enquiry, include a straight-on view, a chassis-plate image, and a rear mounting view. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The parts coordinator can begin with straight-on view to trace lamp or grille openings. A second image should show upper edge alignment below the lamps from chassis-plate image. Before the repair schedule is finalized, measure bracket and bolt-hole spacing and note any difference from the removed component. Keep these observations with the Hyundai Sonata ’11-’13 vehicle record.

The repair planner should note bracket and bolt-hole spacing from an adjacent-panel image, then measure upper edge alignment below the lamps before the stock request is released. A vehicle inspector should evaluate side-retainer engagement from a vehicle-side photograph, then inspect overall corner curvature before the installation begins. The repair planner should compare overall corner curvature from a lower-retainer view, then record upper edge alignment below the lamps before the fitment decision is signed off. A vehicle inspector should inspect bracket and bolt-hole spacing from a corner-profile view, then confirm side-retainer engagement before the delivery plan is confirmed.

Purchase Preparation

Trial-position the component with nearby trim loosened only as required by workshop procedure. No packing entry is published here; request current carton and quantity information with the quotation.

Procurement Checklist

Quotation review is faster when quantity, shipping destination and original-part images arrive together. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Frequently Asked Questions

Which Hyundai model does this page cover?

The associated model designation is Hyundai Sonata ’11-’13. Confirm the body or electrical configuration relevant to this rear bumper bracket.

What should a workshop inspect before purchase?

The practical checks are lamp or grille openings, upper edge alignment below the lamps and the surrounding clearance. Avoid choosing the item from the model name alone.

What information helps confirm availability?

Quotation review is faster when quantity, shipping destination and original-part images arrive together. This information helps separate technical confirmation from the later shipping calculation.