86611-1J500 Rear Bumper for Hyundai I20 ’12 / I20 ’16

Rear Bumper for Hyundai I20 ’12 / I20 ’16: A reliable quotation starts with a clear component description and physical comparison evidence. The component belongs to the bumper inspection group.

Product Specifications

Commercial Request Details

This rear bumper is associated with Hyundai I20 ’12 / I20 ’16. Retain the complete sequence 86611-1J500 when sending a confirmation request. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Application Review

• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps

The importing distributor should record overall corner curvature, cross-check bracket and bolt-hole spacing, and evaluate upper edge alignment below the lamps before the delivery plan is confirmed. This route applies to the rear bumper shown for Hyundai I20 ’12 / I20 ’16.

If images accompany the enquiry, include a vehicle-side photograph, an installation-opening picture, and a vehicle-side photograph. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The importing distributor can begin with vehicle-side photograph to record overall corner curvature. A second image should show lamp or grille openings from installation-opening picture. Before the delivery plan is confirmed, cross-check upper edge alignment below the lamps and note any difference from the removed component. Keep these observations with the Hyundai I20 ’12 / I20 ’16 vehicle record.

The repair planner should measure overall corner curvature from an original-label photograph, then align side-retainer engagement before the installation begins. The procurement contact should photograph side-retainer engagement from a removed-part overview, then cross-check lamp or grille openings before the vehicle is dismantled. The stock controller should confirm lamp or grille openings from a fastener detail, then assess lamp or grille openings before the delivery plan is confirmed. A workshop estimator should document lamp or grille openings from a lower-retainer view, then trace upper edge alignment below the lamps before the vehicle is dismantled.

Part Recognition Guide

Transfer reusable hardware only after checking that every retainer matches the replacement openings. No packing entry is published here; request current carton and quantity information with the quotation.

Fitment Evidence

Distributors may request pricing by stating volume, destination and the vehicle identification data held. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Product Questions and Answers

Which Hyundai model does this page cover?

Application information points to Hyundai I20 ’12 / I20 ’16. A workshop should still compare the removed item and mounting location before ordering.

What evidence is useful for a fitment review?

Review overall corner curvature first, then inspect lamp or grille openings on the vehicle. Clear photographs help the supplier assess the required version.

What should a distributor send for a quotation?

Distributors may request pricing by stating volume, destination and the vehicle identification data held. Keep each requested product on a separate line when several parts share one shipment.