86569-B4500 Front Bumper Grille for Hyundai I10 ‘2014 / I10 ‘2017

Front Bumper Grille for Hyundai I10 ‘2014 / I10 ‘2017: Use the model label as a starting point, then verify the actual mounting layout on the vehicle. The component belongs to the bumper inspection group.

Product Specifications

Vehicle Confirmation

This front bumper grille is associated with Hyundai I10 ‘2014 / I10 ‘2017. Retain the complete sequence 86569-B4500 when sending a confirmation request. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Purchase Preparation

• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement

The procurement contact should cross-check upper edge alignment below the lamps, compare overall corner curvature, and evaluate side-retainer engagement before the stock request is released. This route applies to the front bumper grille shown for Hyundai I10 ‘2014 / I10 ‘2017.

If images accompany the enquiry, include a straight-on view, a full component outline, and a chassis-plate image. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The procurement contact can begin with straight-on view to cross-check upper edge alignment below the lamps. A second image should show bracket and bolt-hole spacing from full component outline. Before the stock request is released, compare side-retainer engagement and note any difference from the removed component. Keep these observations with the Hyundai I10 ‘2014 / I10 ‘2017 vehicle record.

The receiving technician should photograph lamp or grille openings from a fastener detail, then inspect lamp or grille openings before the fitment decision is signed off. The parts coordinator should compare bracket and bolt-hole spacing from a fixing-point close-up, then measure side-retainer engagement before the packing plan is prepared. The maintenance supervisor should trace overall corner curvature from a connector close-up, then verify side-retainer engagement before the fitment decision is signed off. A vehicle inspector should record side-retainer engagement from an underside image, then measure bracket and bolt-hole spacing before the fitment decision is signed off.

Configuration Check

If the component contacts adjacent panels, pause the work and repeat the fitment comparison. No packing entry is published here; request current carton and quantity information with the quotation.

Vehicle-Side Evidence

Send the order volume and destination together with VIN or chassis information where available. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Product Questions and Answers

What vehicle information should be checked first?

This page associates the front bumper grille with Hyundai I10 ‘2014 / I10 ‘2017. The vehicle record and original component should agree with the pictured version.

What should be compared with the removed component?

Ask the workshop to inspect upper edge alignment below the lamps together with bracket and bolt-hole spacing. VIN or chassis information can clarify market-specific differences.

What information is needed for a quotation?

Send the order volume and destination together with VIN or chassis information where available. Add vehicle details so availability and packing can be checked against the requested version.