86561-D3500 Front Bumper Grille for Hyundai Tucson ’18 / Tucson ’21

Front Bumper Grille for Hyundai Tucson ’18 / Tucson ’21: Use the model label as a starting point, then verify the actual mounting layout on the vehicle. The component belongs to the bumper inspection group.

Product Specifications

Replacement Selection Guide

This front bumper grille is associated with Hyundai Tucson ’18 / Tucson ’21. If 86561-D3500 appears on the original label or casting, continue by confirming holes, clips and clearance. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Ordering Information

• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement

The service adviser should verify upper edge alignment below the lamps, measure overall corner curvature, and review side-retainer engagement before the purchase order is issued. This route applies to the front bumper grille shown for Hyundai Tucson ’18 / Tucson ’21.

If images accompany the enquiry, include a chassis-plate image, a removed-part overview, and a connector close-up. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The service adviser can begin with chassis-plate image to verify upper edge alignment below the lamps. A second image should show bracket and bolt-hole spacing from removed-part overview. Before the purchase order is issued, measure side-retainer engagement and note any difference from the removed component. Keep these observations with the Hyundai Tucson ’18 / Tucson ’21 vehicle record.

The maintenance supervisor should mark overall corner curvature from a straight-on view, then assess upper edge alignment below the lamps before the repair schedule is finalized. The parts coordinator should record side-retainer engagement from an adjacent-panel image, then assess overall corner curvature before the shipment is booked. A vehicle inspector should inspect bracket and bolt-hole spacing from an adjacent-panel image, then confirm side-retainer engagement before the stock request is released. The stock controller should trace upper edge alignment below the lamps from a side-profile photograph, then cross-check lamp or grille openings before the purchase order is issued.

Buyer Verification Notes

Tighten hardware in a controlled sequence after the component sits naturally in its intended location. Recorded packing is 110 × 20 × 14CM / 10PCS; reconfirm current packing when freight is quoted.

Inspection Route

Include packaging questions, requested quantity and the receiving country in the initial enquiry. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Purchase Questions

How should the model application be interpreted?

This page associates the front bumper grille with Hyundai Tucson ’18 / Tucson ’21. The vehicle record and original component should agree with the pictured version.

What should a workshop inspect before purchase?

Review upper edge alignment below the lamps first, then inspect bracket and bolt-hole spacing on the vehicle. Clear photographs help the supplier assess the required version.

What information is needed for a quotation?

Include packaging questions, requested quantity and the receiving country in the initial enquiry. Keep each requested product on a separate line when several parts share one shipment.