86561-2S100 Front Grille for Hyundai Tucson ’21 / Ix35 ’10-’12

Front Grille for Hyundai Tucson ’21 / Ix35 ’10-’12: This component should be selected through a combined check of reference data and visible geometry. The component belongs to the grille inspection group.

Product Specifications

Inspection Route

This front grille is associated with Hyundai Tucson ’21 / Ix35 ’10-’12. An OEM match to 86561-2S100 is one layer of evidence; hole spacing and surrounding parts provide another. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Buyer Verification Notes

• Outer perimeter shape
• Upper tab positions
• Lower clip arrangement
• Mesh or slat pattern
• Clearance beside the lamps

The parts coordinator should record outer perimeter shape, align upper tab positions, and align clearance beside the lamps before the carton is allocated. This route applies to the front grille shown for Hyundai Tucson ’21 / Ix35 ’10-’12.

If images accompany the enquiry, include a side-profile photograph, an original-label photograph, and a side-profile photograph. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The parts coordinator can begin with side-profile photograph to record outer perimeter shape. A second image should show lower clip arrangement from original-label photograph. Before the carton is allocated, align clearance beside the lamps and note any difference from the removed component. Keep these observations with the Hyundai Tucson ’21 / Ix35 ’10-’12 vehicle record.

The parts coordinator should inspect clearance beside the lamps from a side-profile photograph, then cross-check clearance beside the lamps before the purchase order is issued. A body-shop buyer should note outer perimeter shape from a vehicle-side photograph, then mark mesh or slat pattern before the stock request is released. A body-shop buyer should document outer perimeter shape from an original-label photograph, then mark clearance beside the lamps before the replacement is test-positioned. The parts coordinator should record mesh or slat pattern from an upper-edge image, then photograph outer perimeter shape before the fitment decision is signed off.

Part Recognition Guide

For electrical items, disconnect power according to workshop practice and compare plug orientation first. No packing entry is published here; request current carton and quantity information with the quotation.

Vehicle-Side Evidence

Include packaging questions, requested quantity and the receiving country in the initial enquiry. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Ordering FAQ

What model is associated with this replacement part?

This front grille is listed for Hyundai Tucson ’21 / Ix35 ’10-’12. Use that designation as a starting point and verify the vehicle configuration before ordering.

Which details help confirm the correct version?

Check outer perimeter shape, confirm lower clip arrangement, and retain the removed part until the replacement has been compared side by side.

What should be included in a B2B enquiry?

Include packaging questions, requested quantity and the receiving country in the initial enquiry. Add vehicle details so availability and packing can be checked against the requested version.