86513-A0000 / 86514-A0000 Front Bumper Bracket for Hyundai I30 ’12 / Ix25 / Creta

Front Bumper Bracket for Hyundai I30 ’12 / Ix25 / Creta: Use this listing as a practical identification record before requesting price and freight. The component belongs to the bumper inspection group.

Product Specifications

Pre-Order Inspection

This front bumper bracket is associated with Hyundai I30 ’12 / Ix25 / Creta. The OEM entry 86513-A0000 / 86514-A0000 supplies a searchable identifier and should agree with the original marking. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Fitment Evidence

• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement

The stock controller should capture upper edge alignment below the lamps, mark overall corner curvature, and mark side-retainer engagement before the replacement is test-positioned. This route applies to the front bumper bracket shown for Hyundai I30 ’12 / Ix25 / Creta.

If images accompany the enquiry, include an original-label photograph, a chassis-plate image, and an upper-edge image. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The stock controller can begin with original-label photograph to capture upper edge alignment below the lamps. A second image should show bracket and bolt-hole spacing from chassis-plate image. Before the replacement is test-positioned, mark side-retainer engagement and note any difference from the removed component. Keep these observations with the Hyundai I30 ’12 / Ix25 / Creta vehicle record.

A vehicle inspector should measure upper edge alignment below the lamps from an installation-opening picture, then measure overall corner curvature before the stock request is released. The installation team should review bracket and bolt-hole spacing from a vehicle-side photograph, then mark lamp or grille openings before the vehicle is dismantled. A vehicle inspector should compare upper edge alignment below the lamps from an upper-edge image, then align lamp or grille openings before the replacement is test-positioned. The repair planner should verify bracket and bolt-hole spacing from a vehicle-side photograph, then confirm side-retainer engagement before the packing plan is prepared.

Technical Comparison Notes

Complete any functional test appropriate to the component before closing trim or returning the vehicle. No packing entry is published here; request current carton and quantity information with the quotation.

Purchase Preparation

Distributors may request pricing by stating volume, destination and the vehicle identification data held. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Purchase Questions

Which vehicle is this component listed for?

The listing covers Hyundai I30 ’12 / Ix25 / Creta. Because configurations may vary, check the actual installation area before approving the front bumper bracket.

What should be compared with the removed component?

Photograph upper edge alignment below the lamps and the mounting area around bracket and bolt-hole spacing. Combine those images with vehicle identification data for review.

What should a distributor send for a quotation?

Distributors may request pricing by stating volume, destination and the vehicle identification data held. Add vehicle details so availability and packing can be checked against the requested version.