86511-2B500 Front Bumper for Hyundai Santa Fe ’09

Front Bumper for Hyundai Santa Fe ’09: This product entry is arranged for workshops and distributors checking a replacement requirement. The component belongs to the bumper inspection group.

Product Specifications

Buyer Verification Notes

This front bumper is associated with Hyundai Santa Fe ’09. Compare 86511-2B500 character by character with the marking on the removed component. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Physical Fitment Points

• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature

The repair planner should trace bracket and bolt-hole spacing, evaluate lamp or grille openings, and evaluate overall corner curvature before the vehicle is dismantled. This route applies to the front bumper shown for Hyundai Santa Fe ’09.

If images accompany the enquiry, include a rear mounting view, a fixing-point close-up, and a corner-profile view. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The repair planner can begin with rear mounting view to trace bracket and bolt-hole spacing. A second image should show side-retainer engagement from fixing-point close-up. Before the vehicle is dismantled, evaluate overall corner curvature and note any difference from the removed component. Keep these observations with the Hyundai Santa Fe ’09 vehicle record.

The parts coordinator should compare lamp or grille openings from a connector close-up, then mark side-retainer engagement before the carton is allocated. A body-shop buyer should measure bracket and bolt-hole spacing from a connector close-up, then record side-retainer engagement before the replacement is test-positioned. The stock controller should align bracket and bolt-hole spacing from a corner-profile view, then confirm overall corner curvature before the delivery plan is confirmed. The stock controller should inspect upper edge alignment below the lamps from a chassis-plate image, then trace side-retainer engagement before the carton is allocated.

Configuration Check

Photograph the original arrangement before removal when several brackets or connectors are involved. Recorded packing is 230 × 57 × 13CM / 1PCS; reconfirm current packing when freight is quoted.

Ordering Information

Send the order volume and destination together with VIN or chassis information where available. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Ordering FAQ

How should the model application be interpreted?

This front bumper appears under Hyundai Santa Fe ’09. Review the exact vehicle version rather than relying on the model name by itself.

How can an incorrect order be avoided?

Fitment evidence should show bracket and bolt-hole spacing, side-retainer engagement and the position where the component will be installed.

What information helps confirm availability?

Send the order volume and destination together with VIN or chassis information where available. Packing and freight can be discussed after the component version has been identified.