42487161 / 42487165 Fgo Lamp Moulding for Daewoo Spark ’18 Ng / Spark ’18 Beat

Fgo Lamp Moulding for Daewoo Spark ’18 Ng / Spark ’18 Beat: This product entry is arranged for workshops and distributors checking a replacement requirement. The component belongs to the lighting inspection group.

Product Specifications

Repair Planning Notes

This fgo lamp moulding is associated with Daewoo Spark ’18 Ng / Spark ’18 Beat. A search enquiry may include 42487161 / 42487165; the order should also state the vehicle and required side. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Purchase Preparation

• Left or right installation position
• Clearance beside bumper and grille
• Lens profile and outer edge
• Electrical plug and pin layout
• Mounting tabs around the housing

A workshop estimator should cross-check left or right installation position, photograph clearance beside bumper and grille, and note mounting tabs around the housing before the vehicle is dismantled. This route applies to the fgo lamp moulding shown for Daewoo Spark ’18 Ng / Spark ’18 Beat.

If images accompany the enquiry, include a corner-profile view, an original-label photograph, and an upper-edge image. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

A workshop estimator can begin with corner-profile view to cross-check left or right installation position. A second image should show lens profile and outer edge from original-label photograph. Before the vehicle is dismantled, photograph mounting tabs around the housing and note any difference from the removed component. Keep these observations with the Daewoo Spark ’18 Ng / Spark ’18 Beat vehicle record.

The parts coordinator should evaluate clearance beside bumper and grille from a full component outline, then photograph lens profile and outer edge before the quotation is approved. The stock controller should inspect electrical plug and pin layout from a side-profile photograph, then review clearance beside bumper and grille before the vehicle is dismantled. The importing distributor should cross-check lens profile and outer edge from a side-profile photograph, then trace mounting tabs around the housing before the packing plan is prepared. The service adviser should inspect mounting tabs around the housing from an adjacent-panel image, then confirm clearance beside bumper and grille before the delivery plan is confirmed.

Vehicle Confirmation

Do not enlarge holes, bend brackets or force electrical plugs to compensate for a mismatch. No packing entry is published here; request current carton and quantity information with the quotation.

Vehicle-Side Evidence

Repair shops should attach vehicle and removed-part evidence when asking for availability and freight. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Fitment FAQ

Which Hyundai model does this page cover?

The associated model designation is Daewoo Spark ’18 Ng / Spark ’18 Beat. Confirm the body or electrical configuration relevant to this fgo lamp moulding.

How can an incorrect order be avoided?

Photograph left or right installation position and the mounting area around lens profile and outer edge. Combine those images with vehicle identification data for review.

What information is needed for a quotation?

Repair shops should attach vehicle and removed-part evidence when asking for availability and freight. Packing and freight can be discussed after the component version has been identified.