Showing 1–12 of 21 results

Exterior Mirror – JI’AO Xingwang / Chenggong Yihao / BAIC E130/E150

  • Begin the enquiry in catalog group JI'AO Xingwang / Chenggong Yihao / BAIC E130/E150 and specify the exact vehicle
  • Use the displayed OE information: Available on Request
  • Include any shipment packing requirements in your enquiry
  • Resolve any difference involving the body contact area
  • State the required units and destination for a commercial offer
  • Keep a clear view of the entire exterior mirror with the enquiry
  • Record the required installation side and check the fixing pattern at the vehicle
  • Retain delivery labels until the supplied item has been accepted
  • Add close-ups that answer a specific identification question

Fog Light – JI’AO Xingwang / Chenggong Yihao / BAIC E130/E150

  • Group designation: JI'AO Xingwang / Chenggong Yihao / BAIC E130/E150; verify the required application separately
  • Reference shown with this item: Available on Request
  • Show an intact comparison area if the existing part has been damaged
  • Look closely at the rear connector area on the original
  • Packing note for review with the order: 85.5*43.5*20CM/20PCS
  • Photograph the original fog light in its normal position
  • Take separate detail views for the fixing centres and rear housing profile when needed
  • Keep the final quotation linked to the agreed part selection
  • Verify the supplied item before carrying out permanent finishing work

Fog Light – JI’AO Xingwang / Chenggong Yihao / BAIC E130/E150 – Image B

  • Vehicle group shown in the catalog: JI'AO Xingwang / Chenggong Yihao / BAIC E130/E150; check the specific match
  • The OE reference is Available on Request
  • Confirm the fog light position from the actual vehicle
  • Show an intact comparison area if the existing part has been damaged
  • Keep the lamp-to-body joint clearly visible in the comparison
  • Ask for carton measurements needed by the intended carrier
  • Set a mismatched delivery aside while the difference is reviewed
  • Ask for clarification where the retaining features or lens shape is uncertain
  • Use the approved comparison details in the purchase enquiry

Fog Light Cover – JI’AO Xingwang / Chenggong Yihao / BAIC E130/E150

  • This item is grouped with JI'AO Xingwang / Chenggong Yihao / BAIC E130/E150; confirm its individual application
  • Number reference for this enquiry: Available on Request
  • Use the original fog light cover as the starting point for selection
  • Have dispatch packing confirmed before scheduling collection
  • Confirm the individual item before discussing final transport charges
  • Keep the original part available for the first delivery comparison
  • Ask for clarification where the end shape or rear clips is uncertain
  • Provide a clear comparison of the mounting tabs
  • Show an intact comparison area if the existing part has been damaged

Front Bumper – JI’AO Xingwang / Chenggong Yihao / BAIC E130/E150

  • This listing sits under JI'AO Xingwang / Chenggong Yihao / BAIC E130/E150; confirm the configuration for your vehicle
  • Identification number information: Available on Request
  • Take separate detail views for the rear fastening areas and support interfaces when needed
  • Use the original item to establish the corner shape
  • Photograph the original front bumper in its normal position
  • Check the delivered item against the agreed images before workshop use
  • Request price information after resolving the part identification
  • Add close-ups that answer a specific identification question
  • Use packing note 145*35*60CM/5PCS when discussing dispatch details

Front Bumper Bracket – JI’AO Xingwang / Chenggong Yihao / BAIC E130/E150

  • Group designation: JI'AO Xingwang / Chenggong Yihao / BAIC E130/E150; verify the required application separately
  • Reference shown with this item: Available on Request
  • Keep the original part available for the first delivery comparison
  • Show the front bumper bracket mounting area alongside the removed item
  • Keep the mating surfaces clearly visible in the comparison
  • Supply the purchase quantity with the receiving-country details
  • Confirm the original hole spacing and the required installed location
  • Obtain current packing information with the quotation
  • Show the surrounding assembly so the requested piece is unambiguous

Grille – JI’AO Xingwang / Chenggong Yihao / BAIC E130/E150

  • Find the actual vehicle within group JI'AO Xingwang / Chenggong Yihao / BAIC E130/E150 before selecting the part
  • The OE reference is Available on Request
  • Check the packed size and carton quantity before freight is booked
  • Include more than one viewing angle to make the shape clear
  • A complete comparison covers the rear retainers as well as the clip locations
  • Verify the supplied item before carrying out permanent finishing work
  • Show the grille mounting area alongside the removed item
  • Discuss delivery terms using the selected item and requested quantity
  • Check the opening design in the intended vehicle position

Grille – JI’AO Xingwang / Chenggong Yihao / BAIC E130/E150 – Image B

  • Catalog grouping JI'AO Xingwang / Chenggong Yihao / BAIC E130/E150 does not establish fitment across all listed vehicles
  • Number reference for this enquiry: Available on Request
  • Document the part's arrival condition before installation starts
  • Use a measurement scale for dimensions that a picture cannot establish
  • Confirm the grille position from the actual vehicle
  • Take separate detail views for the opening design and clip locations when needed
  • Give the intended receiving market and number of units needed
  • Request shipping dimensions after confirming the item and volume
  • Provide a clear comparison of the lower tabs

Headlight Assembly – JI’AO Xingwang / Chenggong Yihao / BAIC E130/E150

  • Begin the enquiry in catalog group JI'AO Xingwang / Chenggong Yihao / BAIC E130/E150 and specify the exact vehicle
  • OE information accompanying the listing: Available on Request
  • Add close-ups that answer a specific identification question
  • Identify the pictured headlight assembly before arranging the purchase
  • The listed packing reference is 94*52*45CM/8PCS; request current confirmation
  • Check the rear connector area and retaining features against the original arrangement
  • Check the unpacked piece against the selected catalog image
  • Resolve any difference involving the body depth
  • Include the delivery location when requesting supply terms

Headlight Assembly – JI’AO Xingwang / Chenggong Yihao / BAIC E130/E150 – Image B

  • Catalog grouping JI'AO Xingwang / Chenggong Yihao / BAIC E130/E150 does not establish fitment across all listed vehicles
  • Reference shown with this item: Available on Request
  • Photograph visible damage during the initial unpacking inspection
  • Record any unreadable or missing original identification in the enquiry
  • Use the original item to establish the body depth
  • Establish the required headlight assembly from vehicle-specific evidence
  • Give the intended receiving market and number of units needed
  • Also examine the locating-pin positions and rear connector area
  • Ask for the carton arrangement applicable to the agreed quantity

Headlight Assembly – JI’AO Xingwang / Chenggong Yihao / BAIC E130/E150 – Image C

  • Find the actual vehicle within group JI'AO Xingwang / Chenggong Yihao / BAIC E130/E150 before selecting the part
  • Part reference entry — Available on Request
  • Check the retaining features and fixing centres against the original arrangement
  • Confirm the individual item before discussing final transport charges
  • Confirm how the lamp-to-body joint compares with the old item
  • Compare the delivered version with the final purchase details
  • Request a packing breakdown for the final purchase volume
  • Match the required headlight assembly configuration to the pictured item
  • Keep the required orientation clear in all comparison photographs

Headlight Assembly – JI’AO Xingwang / Chenggong Yihao / BAIC E130/E150 – Image D

  • This listing sits under JI'AO Xingwang / Chenggong Yihao / BAIC E130/E150; confirm the configuration for your vehicle
  • OE identification details: Available on Request
  • Confirm the headlight assembly position from the actual vehicle
  • Use sharp photographs with the relevant edges in view
  • Confirm the individual item before discussing final transport charges
  • Check the unpacked piece against the selected catalog image
  • Use the original item to establish the lamp-to-body joint
  • Ask for the carton arrangement applicable to the agreed quantity
  • Include the locating-pin positions with a second view of the housing contour

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue