Showing 1–12 of 43 results

Bumper Grille – Fengguang 360 / DFA 580 / DFA S560

  • Use the Fengguang 360 / DFA 580 / DFA S560 catalog group with the actual vehicle and original part
  • Reference shown with this item: Available on Request
  • Include more than one viewing angle to make the shape clear
  • Give the mounting outline a separate check before deciding
  • Keep the final quotation linked to the agreed part selection
  • Keep a clear view of the entire bumper grille with the enquiry
  • Record the frame shape and check the edge joints at the vehicle
  • Retain delivery labels until the supplied item has been accepted
  • Request shipping dimensions after confirming the item and volume

Bumper Grille – Fengguang 360 / DFA 580 / DFA S560 – Image B

  • Use the Fengguang 360 / DFA 580 / DFA S560 catalog group with the actual vehicle and original part
  • Part reference entry — Available on Request
  • Check the packed size and carton quantity before freight is booked
  • Flag discrepancies in the end curvature or edge joints before purchase
  • Report visible transit damage with images of the part and packaging
  • Supply the purchase quantity with the receiving-country details
  • Specify which bumper grille is needed and its installation location
  • Record any unreadable or missing original identification in the enquiry
  • Clarify the required frame depth with a detail photograph

Engine Underbody Panel – DFA S560 / Rongguang / Hongguang

  • Catalog grouping DFA S560 / Rongguang / Hongguang does not establish fitment across all listed vehicles
  • Part reference entry — Available on Request
  • Match the required engine underbody panel configuration to the pictured item
  • Discuss the proposed cartons with the commercial offer
  • Give the fastening slots a separate check before deciding
  • Record the front fixing edge and check the rear overlap at the vehicle
  • Confirm the individual item before discussing final transport charges
  • Show an intact comparison area if the existing part has been damaged
  • Set a mismatched delivery aside while the difference is reviewed

Exterior Mirror – DFA S560 / Rongguang / Hongguang

  • Catalog model group — DFA S560 / Rongguang / Hongguang; identify the particular vehicle required
  • Part reference entry — Available on Request
  • Show the exterior mirror mounting area alongside the removed item
  • Use sharp photographs with the relevant edges in view
  • Give the required installation side a separate check before deciding
  • State the required units and destination for a commercial offer
  • Confirm how the order quantity will be prepared for delivery
  • Check the delivered item against the agreed images before workshop use
  • Take separate detail views for the mounting arm shape and fastener positions when needed

Exterior Mirror – Fengguang 360 / DFA 580 / DFA S560

  • Vehicle group shown in the catalog: Fengguang 360 / DFA 580 / DFA S560; check the specific match
  • Reference shown with this item: Available on Request
  • Establish the packing arrangement when the supply details are agreed
  • Compare the delivered version with the final purchase details
  • Use consistent angles to assess the attachment face and glass profile
  • Supply the purchase quantity with the receiving-country details
  • Look closely at the overall size on the original
  • Include the reverse face where it helps identify the attachments
  • Include an overall view of the exterior mirror you need to replace

Fan Assembly – DFA S560 / Rongguang / Hongguang

  • Catalog navigation group: DFA S560 / Rongguang / Hongguang; supply precise vehicle details for selection
  • Reference shown with this item: Available on Request
  • Use sharp photographs with the relevant edges in view
  • Include the original motor label with a second view of the assembly depth
  • Inspect the complete part's condition before fitting preparation
  • Ask for carton measurements needed by the intended carrier
  • Give the surrounding clearance a separate check before deciding
  • Keep the final quotation linked to the agreed part selection
  • Keep a clear view of the entire fan assembly with the enquiry

Fog Light – DFA S560 / Rongguang / Hongguang

  • This listing sits under DFA S560 / Rongguang / Hongguang; confirm the configuration for your vehicle
  • Use the displayed OE information: Available on Request
  • Set a mismatched delivery aside while the difference is reviewed
  • Confirm how the order quantity will be prepared for delivery
  • Include the delivery location when requesting supply terms
  • Add an installed overview to explain where the replacement is needed
  • Record the original identification markings and check the rear connector area at the vehicle
  • Check the locating-pin positions in the intended vehicle position
  • Keep a clear view of the entire fog light with the enquiry

Fog Light – DFA S560 / Rongguang / Hongguang – Image B

  • Vehicle group shown in the catalog: DFA S560 / Rongguang / Hongguang; check the specific match
  • OE enquiry reference: Available on Request
  • Use consistent angles to assess the rear housing profile and rear connector area
  • Check this fog light with the old item available for comparison
  • Check the lamp-to-body joint in the intended vehicle position
  • Include the delivery location when requesting supply terms
  • Request a packing breakdown for the final purchase volume
  • Photograph visible damage during the initial unpacking inspection
  • Keep the required orientation clear in all comparison photographs

Fog Light – DFA S560 / Rongguang / Hongguang – Image C

  • This listing sits under DFA S560 / Rongguang / Hongguang; confirm the configuration for your vehicle
  • OE identification details: Available on Request
  • Record any unreadable or missing original identification in the enquiry
  • Photograph visible damage during the initial unpacking inspection
  • Include the delivery location when requesting supply terms
  • Packing note for review with the order: 83*49*53CM/40PCS
  • Check the housing contour in the intended vehicle position
  • Show the fog light mounting area alongside the removed item
  • Include the locating-pin positions with a second view of the body depth

Fog Light – Fengguang 360 / DFA 580 / DFA S560

  • Vehicle group shown in the catalog: Fengguang 360 / DFA 580 / DFA S560; check the specific match
  • Use the displayed OE information: Available on Request
  • Confirm the individual item before discussing final transport charges
  • Verify the supplied item before carrying out permanent finishing work
  • Include the housing contour with a second view of the body depth
  • Add close-ups that answer a specific identification question
  • Photograph the original fog light in its normal position
  • Use the original item to establish the rear connector area
  • Ask for the carton arrangement applicable to the agreed quantity

Fog Light – Fengguang 360 / DFA 580 / DFA S560 – Image B

  • Model group in the catalog: Fengguang 360 / DFA 580 / DFA S560; suitability needs a vehicle-specific check
  • Reference shown with this item: Available on Request
  • Also examine the rear housing profile and rear connector area
  • Establish the required fog light from vehicle-specific evidence
  • Review the attachment lugs as an identification feature
  • Confirm how the order quantity will be prepared for delivery
  • Keep visible markings readable and show the whole item before close-ups
  • Keep the packaging until the received configuration is confirmed
  • Keep the final quotation linked to the agreed part selection

Fog Light Cover – Fengguang 360 / DFA 580 / DFA S560

  • Find the actual vehicle within group Fengguang 360 / DFA 580 / DFA S560 before selecting the part
  • Identification number information: Available on Request
  • Check the installed orientation and edge contour against the original arrangement
  • Ask about lead time once the required configuration is identified
  • Review the attachment slots as an identification feature
  • Confirm how the order quantity will be prepared for delivery
  • Include an overall view of the fog light cover you need to replace
  • Keep the required orientation clear in all comparison photographs
  • Check the unpacked piece against the selected catalog image

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue