Showing 1–12 of 23 results

Bumper Light – Chana Kaichen F70 / Weiwang 205

  • Begin the enquiry in catalog group Chana Kaichen F70 / Weiwang 205 and specify the exact vehicle
  • The OE reference is Available on Request
  • Give the intended receiving market and number of units needed
  • Record any unreadable or missing original identification in the enquiry
  • Specify which bumper light is needed and its installation location
  • Keep the original part available for the first delivery comparison
  • Take separate detail views for the locating-pin positions and mounting footprint when needed
  • Obtain confirmed shipment measurements for delivery estimates
  • Use the original item to establish the attachment lugs

Exterior Mirror – Chana Kaichen F70 / Weiwang 205

  • Begin the enquiry in catalog group Chana Kaichen F70 / Weiwang 205 and specify the exact vehicle
  • OE enquiry reference: Available on Request
  • Capture a useful angle of the mounting arm shape
  • Use the original exterior mirror as the starting point for selection
  • Keep the original part available for the first delivery comparison
  • Ask for clarification where the glass profile or attachment face is uncertain
  • Obtain current packing information with the quotation
  • Use sharp photographs with the relevant edges in view
  • State the required units and destination for a commercial offer

Fender Plate – Chana Kaichen F70 / Weiwang 205

  • Use the Chana Kaichen F70 / Weiwang 205 catalog group with the actual vehicle and original part
  • Use the displayed OE information: Available on Request
  • Verify the supplied item before carrying out permanent finishing work
  • Describe the existing fender plate and any unclear identification details
  • Review the attachment surface as an identification feature
  • Send the order requirement with the comparison information
  • Ask for carton measurements needed by the intended carrier
  • Use sharp photographs with the relevant edges in view
  • Take separate detail views for the overall dimensions and edge shape when needed

Fog Light – Chana Kaichen F70 / Weiwang 205

  • Catalog navigation group: Chana Kaichen F70 / Weiwang 205; supply precise vehicle details for selection
  • The OE reference is Available on Request
  • Ask for clarification where the retaining features or locating-pin positions is uncertain
  • Keep a clear view of the entire fog light with the enquiry
  • Use the approved comparison details in the purchase enquiry
  • Keep the lens shape clearly visible in the comparison
  • Show an intact comparison area if the existing part has been damaged
  • Obtain confirmed shipment measurements for delivery estimates
  • Inspect the complete part's condition before fitting preparation

Fog Light – Chana Kaichen F70 / Weiwang 205 – Image B

  • Use the Chana Kaichen F70 / Weiwang 205 catalog group with the actual vehicle and original part
  • OE enquiry reference: Available on Request
  • Add close-ups that answer a specific identification question
  • Describe the existing fog light and any unclear identification details
  • Retain delivery labels until the supplied item has been accepted
  • Discuss the proposed cartons with the commercial offer
  • Ask about lead time once the required configuration is identified
  • Use consistent angles to assess the rear housing profile and attachment lugs
  • Resolve any difference involving the lamp-to-body joint

Front Bumper – Chana Kaichen F70 / Weiwang 205

  • This item is grouped with Chana Kaichen F70 / Weiwang 205; confirm its individual application
  • Part reference entry — Available on Request
  • Also examine the wheel-arch meeting points and body junctions
  • Verify the supplied item before carrying out permanent finishing work
  • Confirm whether the packing entry 150*27*50CM/5PCS applies to the quoted volume
  • Show the surrounding assembly so the requested piece is unambiguous
  • State the required units and destination for a commercial offer
  • Record the original arrangement of the rear fastening areas
  • Match the required front bumper configuration to the pictured item

Front Bumper Bracket – Chana Kaichen F70 / Weiwang 205

  • Catalog navigation group: Chana Kaichen F70 / Weiwang 205; supply precise vehicle details for selection
  • Part reference entry — Available on Request
  • Look closely at the installed location on the original
  • Specify which front bumper bracket is needed and its installation location
  • Ask for carton measurements needed by the intended carrier
  • Show both the contact faces and fastener access in the identification images
  • Show the surrounding assembly so the requested piece is unambiguous
  • Use the approved comparison details in the purchase enquiry
  • Compare the delivered version with the final purchase details

Front Bumper Grille – Chana Kaichen F70 / Weiwang 205

  • Use the Chana Kaichen F70 / Weiwang 205 catalog group with the actual vehicle and original part
  • OE reference status: Available on Request
  • Flag discrepancies in the mounting outline or end curvature before purchase
  • Add close-ups that answer a specific identification question
  • Inspect the complete part's condition before fitting preparation
  • Obtain confirmed shipment measurements for delivery estimates
  • Match the required front bumper grille configuration to the pictured item
  • Confirm how the adjacent trim interfaces compares with the old item
  • Supply the purchase quantity with the receiving-country details

Front Bumper Lower Section – Chana Kaichen F70 / Weiwang 205

  • Group designation: Chana Kaichen F70 / Weiwang 205; verify the required application separately
  • Number reference for this enquiry: Available on Request
  • Use the original item to establish the end contours
  • Verify the supplied item before carrying out permanent finishing work
  • Describe the existing front bumper lower section and any unclear identification details
  • Add an installed overview to explain where the replacement is needed
  • Discuss delivery terms using the selected item and requested quantity
  • Flag discrepancies in the support interfaces or rear fastening areas before purchase
  • Have dispatch packing confirmed before scheduling collection

Front Bumper Panel – Chana Kaichen F70 / Weiwang 205

  • Listed model group Chana Kaichen F70 / Weiwang 205 is a starting point for identification
  • OE reference status: Available on Request
  • Check the packed size and carton quantity before freight is booked
  • Inspect the complete part's condition before fitting preparation
  • Ask for clarification where the neighbouring panel joints or overall dimensions is uncertain
  • Review the edge shape as an identification feature
  • Match the required front bumper panel configuration to the pictured item
  • Include the delivery location when requesting supply terms
  • Keep the required orientation clear in all comparison photographs

Front Bumper Upper Section – Chana Kaichen F70 / Weiwang 205

  • Listed model group Chana Kaichen F70 / Weiwang 205 is a starting point for identification
  • OE information accompanying the listing: Available on Request
  • Check the side fixing areas in the intended vehicle position
  • Use sharp photographs with the relevant edges in view
  • Check the packed size and carton quantity before freight is booked
  • Include an overall view of the front bumper upper section you need to replace
  • Check the upper attachment edge and wheel-arch meeting points against the original arrangement
  • Inspect the complete part's condition before fitting preparation
  • Request availability for the confirmed item and order volume

Grille – Chana Kaichen F70 / Weiwang 205

  • Model group in the catalog: Chana Kaichen F70 / Weiwang 205; suitability needs a vehicle-specific check
  • OE reference status: Available on Request
  • Resolve any difference involving the rear retainers
  • Use a measurement scale for dimensions that a picture cannot establish
  • Confirm the grille position from the actual vehicle
  • Packing information supplied: 93*37*62CM/10PCS; confirm the shipment arrangement
  • Check the unpacked piece against the selected catalog image
  • Also examine the opening design and end curvature
  • Give the intended receiving market and number of units needed

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue