Showing 1–12 of 42 results

Show 9 12 18 24

Bumper Grille - BAIC E130/E150 / BAIC Senova D20 / BAIC X25

Quick view

Compare

Add to wishlist

Bumper Grille – BAIC E130/E150 / BAIC Senova D20 / BAIC X25

Begin the enquiry in catalog group BAIC E130/E150 / BAIC Senova D20 / BAIC X25 and specify the exact vehicle
Identification number information: Available on Request
Specify which bumper grille is needed and its installation location
Report visible transit damage with images of the part and packaging
Confirm how the adjacent trim interfaces compares with the old item
Supply the purchase quantity with the receiving-country details
Record any unreadable or missing original identification in the enquiry
Obtain confirmed shipment measurements for delivery estimates
Take separate detail views for the edge joints and end curvature when needed

Bumper Grille - BAIC X25 / Huansu S2 / BAIC Huansu S3

Quick view

Compare

Add to wishlist

Bumper Grille – BAIC X25 / Huansu S2 / BAIC Huansu S3

Vehicle group shown in the catalog: BAIC X25 / Huansu S2 / BAIC Huansu S3; check the specific match
Reference shown with this item: Available on Request
Keep the final quotation linked to the agreed part selection
Describe the existing bumper grille and any unclear identification details
Add an installed overview to explain where the replacement is needed
Ask for the carton arrangement applicable to the agreed quantity
Give the lower tabs a separate check before deciding
Include the upper attachment points with a second view of the clip locations
Keep the packaging until the received configuration is confirmed

Exterior Mirror - BAIC X25 / Huansu S2 / BAIC Huansu S3

Quick view

Compare

Add to wishlist

Exterior Mirror – BAIC X25 / Huansu S2 / BAIC Huansu S3

Find the actual vehicle within group BAIC X25 / Huansu S2 / BAIC Huansu S3 before selecting the part
OE reference status: Available on Request
State the required units and destination for a commercial offer
Ask for carton measurements needed by the intended carrier
Flag discrepancies in the body contact area or mounting base before purchase
Use the original exterior mirror as the starting point for selection
Use sharp photographs with the relevant edges in view
Provide a clear comparison of the housing outline
Photograph visible damage during the initial unpacking inspection

Quick view

Compare

Add to wishlist

Exterior Mirror – BAIC X25 / Huansu S2 / BAIC Huansu S3 – Image B

Catalog navigation group: BAIC X25 / Huansu S2 / BAIC Huansu S3; supply precise vehicle details for selection
Identification number information: Available on Request
Record the glass profile and check the base-to-body angle at the vehicle
Check the packed size and carton quantity before freight is booked
Give the required installation side a separate check before deciding
Add an installed overview to explain where the replacement is needed
Request price information after resolving the part identification
Keep a clear view of the entire exterior mirror with the enquiry
Check the unpacked piece against the selected catalog image

Fog Light - BAIC E130/E150 / BAIC Senova D20 / BAIC X25

Quick view

Compare

Add to wishlist

Fog Light – BAIC E130/E150 / BAIC Senova D20 / BAIC X25

Catalog navigation group: BAIC E130/E150 / BAIC Senova D20 / BAIC X25; supply precise vehicle details for selection
Use the displayed OE information: Available on Request
Confirm the original attachment lugs and the required locating-pin positions
Keep visible markings readable and show the whole item before close-ups
Have dispatch packing confirmed before scheduling collection
Ask about lead time once the required configuration is identified
Include an overall view of the fog light you need to replace
Resolve any difference involving the lens shape
Retain delivery labels until the supplied item has been accepted

Fog Light - BAIC X25 / Huansu S2 / BAIC Huansu S3

Quick view

Compare

Add to wishlist

Fog Light – BAIC X25 / Huansu S2 / BAIC Huansu S3

Use the BAIC X25 / Huansu S2 / BAIC Huansu S3 catalog group with the actual vehicle and original part
OE identification details: Available on Request
Request shipping dimensions after confirming the item and volume
Clarify the required body depth with a detail photograph
Confirm the individual item before discussing final transport charges
Record the mounting footprint and check the attachment lugs at the vehicle
Report visible transit damage with images of the part and packaging
Include an overall view of the fog light you need to replace
Use a measurement scale for dimensions that a picture cannot establish

Quick view

Compare

Add to wishlist

Fog Light – BAIC X25 / Huansu S2 / BAIC Huansu S3 – Image B

Catalog model group — BAIC X25 / Huansu S2 / BAIC Huansu S3; identify the particular vehicle required
The OE reference is Available on Request
Supply the purchase quantity with the receiving-country details
Review the housing contour as an identification feature
Also examine the rear housing profile and attachment lugs
Document the part's arrival condition before installation starts
Show the surrounding assembly so the requested piece is unambiguous
Check the packed size and carton quantity before freight is booked
Check this fog light with the old item available for comparison

Fog Light Cover - BAIC E130/E150 / BAIC Senova D20 / BAIC X25

Quick view

Compare

Add to wishlist

Fog Light Cover – BAIC E130/E150 / BAIC Senova D20 / BAIC X25

This listing sits under BAIC E130/E150 / BAIC Senova D20 / BAIC X25; confirm the configuration for your vehicle
Identification number information: Available on Request
Report visible transit damage with images of the part and packaging
State the required units and destination for a commercial offer
Discuss the proposed cartons with the commercial offer
Show an intact comparison area if the existing part has been damaged
Provide a clear comparison of the opening shape
Also examine the surrounding panel joint and mounting tabs
Photograph the original fog light cover in its normal position

Quick view

Compare

Add to wishlist

Fog Light Cover – BAIC E130/E150 / BAIC Senova D20 / BAIC X25 – Image B

Catalog navigation group: BAIC E130/E150 / BAIC Senova D20 / BAIC X25; supply precise vehicle details for selection
Use the displayed OE information: Available on Request
Check the contact surface and opening shape against the original arrangement
Use the original item to establish the visible outline
Check the delivered item against the agreed images before workshop use
Obtain confirmed shipment measurements for delivery estimates
Confirm the fog light cover position from the actual vehicle
Use the approved comparison details in the purchase enquiry
Photograph the mounting area before the old item is removed

Fog Light Cover - BAIC X25 / Huansu S2 / BAIC Huansu S3

Quick view

Compare

Add to wishlist

Fog Light Cover – BAIC X25 / Huansu S2 / BAIC Huansu S3

Use the BAIC X25 / Huansu S2 / BAIC Huansu S3 catalog group with the actual vehicle and original part
OE identification details: Available on Request
Include any shipment packing requirements in your enquiry
Describe the existing fog light cover and any unclear identification details
Record the attachment slots and check the retainer spacing at the vehicle
Inspect the complete part's condition before fitting preparation
Keep the required orientation clear in all comparison photographs
Confirm the individual item before discussing final transport charges
Resolve any difference involving the contact surface

Front Bumper - BAIC E130/E150 / BAIC Senova D20 / BAIC X25

Quick view

Compare

Add to wishlist

Front Bumper – BAIC E130/E150 / BAIC Senova D20 / BAIC X25

Group designation: BAIC E130/E150 / BAIC Senova D20 / BAIC X25; verify the required application separately
OE enquiry reference: Available on Request
Give the intended receiving market and number of units needed
Check the delivered item against the agreed images before workshop use
Review the side fixing areas, then clarify the wheel-arch meeting points
Show an intact comparison area if the existing part has been damaged
Match the required front bumper configuration to the pictured item
Check the packed size and carton quantity before freight is booked
Record the original arrangement of the panel alignment

Quick view

Compare

Add to wishlist

Front Bumper – BAIC E130/E150 / BAIC Senova D20 / BAIC X25 – Image B

Catalog navigation group: BAIC E130/E150 / BAIC Senova D20 / BAIC X25; supply precise vehicle details for selection
The OE reference is Available on Request
Capture a useful angle of the wheel-arch meeting points
Ask for the carton arrangement applicable to the agreed quantity
Confirm the front bumper position from the actual vehicle
Retain delivery labels until the supplied item has been accepted
Record any unreadable or missing original identification in the enquiry
State the required units and destination for a commercial offer
Show both the lower profile and corner shape in the identification images