Showing 1–12 of 37 results

Bumper Grille – BAIC Huansu H2 / Huansu H3

  • This item is grouped with BAIC Huansu H2 / Huansu H3; confirm its individual application
  • OE reference status: Available on Request
  • Give the intended receiving market and number of units needed
  • Show the bumper grille mounting area alongside the removed item
  • Check the edge joints and clip locations against the original arrangement
  • Photograph the mounting area before the old item is removed
  • Give the rear retainers a separate check before deciding
  • Obtain current packing information with the quotation
  • Compare the delivered version with the final purchase details

Bumper Grille – BAIC Huansu H2 / Huansu H3 – Image B

  • Model group in the catalog: BAIC Huansu H2 / Huansu H3; suitability needs a vehicle-specific check
  • OE enquiry reference: Available on Request
  • Retain delivery labels until the supplied item has been accepted
  • Establish the required bumper grille from vehicle-specific evidence
  • Review the adjacent trim interfaces, then clarify the edge joints
  • Include the delivery location when requesting supply terms
  • Clarify the required mounting outline with a detail photograph
  • Photograph the mounting area before the old item is removed
  • Ask for the carton arrangement applicable to the agreed quantity

Bumper Grille – BAIC Huansu S3 / Huansu S5 / Huansu S6 / BAIC Huansu H2

  • Group designation: BAIC Huansu S3 / Huansu S5 / Huansu S6 / BAIC Huansu H2; verify the required application separately
  • Number reference for this enquiry: Available on Request
  • Include more than one viewing angle to make the shape clear
  • Keep the packaging until the received configuration is confirmed
  • Obtain current packing information with the quotation
  • Match the required bumper grille configuration to the pictured item
  • Record the original arrangement of the mounting outline
  • Confirm the individual item before discussing final transport charges
  • Flag discrepancies in the frame shape or clip locations before purchase

Exterior Mirror – BAIC Huansu H2 / Huansu H3

  • Find the actual vehicle within group BAIC Huansu H2 / Huansu H3 before selecting the part
  • OE information accompanying the listing: Available on Request
  • Photograph the mounting area before the old item is removed
  • Compare the delivered version with the final purchase details
  • Give the intended receiving market and number of units needed
  • Check this exterior mirror with the old item available for comparison
  • Discuss the proposed cartons with the commercial offer
  • Capture a useful angle of the mounting arm shape
  • Ask for clarification where the body contact area or base-to-body angle is uncertain

Exterior Mirror – BAIC Huansu S3 / Huansu S5 / Huansu S6 / BAIC Huansu H2

  • Catalog navigation group: BAIC Huansu S3 / Huansu S5 / Huansu S6 / BAIC Huansu H2; supply precise vehicle details for selection
  • Use the displayed OE information: Available on Request
  • Use a measurement scale for dimensions that a picture cannot establish
  • Request availability for the confirmed item and order volume
  • Confirm how the order quantity will be prepared for delivery
  • Include the fastener positions with a second view of the mounting base
  • Specify which exterior mirror is needed and its installation location
  • Look closely at the mounting arm shape on the original
  • Keep the original part available for the first delivery comparison

Fog Light – BAIC Huansu H2 / Huansu H3

  • Catalog grouping BAIC Huansu H2 / Huansu H3 does not establish fitment across all listed vehicles
  • OE enquiry reference: Available on Request
  • Show an intact comparison area if the existing part has been damaged
  • Record the attachment lugs and check the rear connector area at the vehicle
  • Check this fog light with the old item available for comparison
  • State the required units and destination for a commercial offer
  • Document the part's arrival condition before installation starts
  • Check the packed size and carton quantity before freight is booked
  • Capture a useful angle of the original identification markings

Fog Light – BAIC Huansu S3 / Huansu S5 / Huansu S6 / BAIC Huansu H2

  • Find the actual vehicle within group BAIC Huansu S3 / Huansu S5 / Huansu S6 / BAIC Huansu H2 before selecting the part
  • OE identification details: Available on Request
  • Flag discrepancies in the attachment lugs or housing contour before purchase
  • Check this fog light with the old item available for comparison
  • Check the lamp-to-body joint in the intended vehicle position
  • Set a mismatched delivery aside while the difference is reviewed
  • Send the order requirement with the comparison information
  • Photograph the mounting area before the old item is removed
  • Obtain confirmed shipment measurements for delivery estimates

Fog Light – BAIC Huansu S3 / Huansu S5 / Huansu S6 / BAIC Huansu H2 – Image B

  • Use the BAIC Huansu S3 / Huansu S5 / Huansu S6 / BAIC Huansu H2 catalog group with the actual vehicle and original part
  • Identification number information: Available on Request
  • Record the lens shape and check the lamp-to-body joint at the vehicle
  • Include an overall view of the fog light you need to replace
  • Inspect the complete part's condition before fitting preparation
  • Use a measurement scale for dimensions that a picture cannot establish
  • Use the approved comparison details in the purchase enquiry
  • Keep the rear connector area clearly visible in the comparison
  • Ask for carton measurements needed by the intended carrier

Fog Light – BAIC Huansu S3 / Huansu S5 / Huansu S6 / BAIC Huansu H2 – Image C

  • Vehicle group shown in the catalog: BAIC Huansu S3 / Huansu S5 / Huansu S6 / BAIC Huansu H2; check the specific match
  • OE identification details: Available on Request
  • A complete comparison covers the mounting footprint as well as the body depth
  • Show an intact comparison area if the existing part has been damaged
  • Use the original fog light as the starting point for selection
  • State the required units and destination for a commercial offer
  • Capture a useful angle of the lamp-to-body joint
  • Include any shipment packing requirements in your enquiry
  • Verify the supplied item before carrying out permanent finishing work

Fog Light Cover – BAIC Huansu H2 / Huansu H3

  • Vehicle group shown in the catalog: BAIC Huansu H2 / Huansu H3; check the specific match
  • Identification number information: Available on Request
  • Establish the required fog light cover from vehicle-specific evidence
  • Confirm how the rear clips compares with the old item
  • Report visible transit damage with images of the part and packaging
  • Request a packing breakdown for the final purchase volume
  • Include the reverse face where it helps identify the attachments
  • Ask for clarification where the mounting tabs or installed orientation is uncertain
  • Send the order requirement with the comparison information

Fog Light Cover – BAIC Huansu H2 / Huansu H3 – Image B

  • Catalog navigation group: BAIC Huansu H2 / Huansu H3; supply precise vehicle details for selection
  • Part reference entry — Available on Request
  • A complete comparison covers the surrounding panel joint as well as the rear clips
  • Check the delivered item against the agreed images before workshop use
  • Keep the overall length clearly visible in the comparison
  • Match the required fog light cover configuration to the pictured item
  • Include the delivery location when requesting supply terms
  • Use a measurement scale for dimensions that a picture cannot establish
  • Ask for the carton arrangement applicable to the agreed quantity

Fog Light Cover without Holes – BAIC Huansu S3 / Huansu S5 / Huansu S6 / BAIC Huansu H2

  • Catalog navigation group: BAIC Huansu S3 / Huansu S5 / Huansu S6 / BAIC Huansu H2; supply precise vehicle details for selection
  • The OE reference is Available on Request
  • Obtain confirmed shipment measurements for delivery estimates
  • Use sharp photographs with the relevant edges in view
  • Show the fog light cover without holes mounting area alongside the removed item
  • Ask about lead time once the required configuration is identified
  • Check the visible outline in the intended vehicle position
  • Report visible transit damage with images of the part and packaging
  • Also examine the installed orientation and opening shape

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue