Showing 1–12 of 41 results

Bumper Grille – BAIC E130/E150 / BAIC Senova D20 / BAIC X25

  • Begin the enquiry in catalog group BAIC E130/E150 / BAIC Senova D20 / BAIC X25 and specify the exact vehicle
  • Identification number information: Available on Request
  • Specify which bumper grille is needed and its installation location
  • Report visible transit damage with images of the part and packaging
  • Confirm how the adjacent trim interfaces compares with the old item
  • Supply the purchase quantity with the receiving-country details
  • Record any unreadable or missing original identification in the enquiry
  • Obtain confirmed shipment measurements for delivery estimates
  • Take separate detail views for the edge joints and end curvature when needed

Exterior Mirror – JI’AO Xingwang / Chenggong Yihao / BAIC E130/E150

  • Begin the enquiry in catalog group JI'AO Xingwang / Chenggong Yihao / BAIC E130/E150 and specify the exact vehicle
  • Use the displayed OE information: Available on Request
  • Include any shipment packing requirements in your enquiry
  • Resolve any difference involving the body contact area
  • State the required units and destination for a commercial offer
  • Keep a clear view of the entire exterior mirror with the enquiry
  • Record the required installation side and check the fixing pattern at the vehicle
  • Retain delivery labels until the supplied item has been accepted
  • Add close-ups that answer a specific identification question

Fog Light – BAIC E130/E150 / BAIC Senova D20 / BAIC X25

  • Catalog navigation group: BAIC E130/E150 / BAIC Senova D20 / BAIC X25; supply precise vehicle details for selection
  • Use the displayed OE information: Available on Request
  • Confirm the original attachment lugs and the required locating-pin positions
  • Keep visible markings readable and show the whole item before close-ups
  • Have dispatch packing confirmed before scheduling collection
  • Ask about lead time once the required configuration is identified
  • Include an overall view of the fog light you need to replace
  • Resolve any difference involving the lens shape
  • Retain delivery labels until the supplied item has been accepted

Fog Light – JI’AO Xingwang / Chenggong Yihao / BAIC E130/E150

  • Group designation: JI'AO Xingwang / Chenggong Yihao / BAIC E130/E150; verify the required application separately
  • Reference shown with this item: Available on Request
  • Show an intact comparison area if the existing part has been damaged
  • Look closely at the rear connector area on the original
  • Packing note for review with the order: 85.5*43.5*20CM/20PCS
  • Photograph the original fog light in its normal position
  • Take separate detail views for the fixing centres and rear housing profile when needed
  • Keep the final quotation linked to the agreed part selection
  • Verify the supplied item before carrying out permanent finishing work

Fog Light – JI’AO Xingwang / Chenggong Yihao / BAIC E130/E150 – Image B

  • Vehicle group shown in the catalog: JI'AO Xingwang / Chenggong Yihao / BAIC E130/E150; check the specific match
  • The OE reference is Available on Request
  • Confirm the fog light position from the actual vehicle
  • Show an intact comparison area if the existing part has been damaged
  • Keep the lamp-to-body joint clearly visible in the comparison
  • Ask for carton measurements needed by the intended carrier
  • Set a mismatched delivery aside while the difference is reviewed
  • Ask for clarification where the retaining features or lens shape is uncertain
  • Use the approved comparison details in the purchase enquiry

Fog Light Cover – BAIC E130/E150 / BAIC Senova D20 / BAIC X25

  • This listing sits under BAIC E130/E150 / BAIC Senova D20 / BAIC X25; confirm the configuration for your vehicle
  • Identification number information: Available on Request
  • Report visible transit damage with images of the part and packaging
  • State the required units and destination for a commercial offer
  • Discuss the proposed cartons with the commercial offer
  • Show an intact comparison area if the existing part has been damaged
  • Provide a clear comparison of the opening shape
  • Also examine the surrounding panel joint and mounting tabs
  • Photograph the original fog light cover in its normal position

Fog Light Cover – BAIC E130/E150 / BAIC Senova D20 / BAIC X25 – Image B

  • Catalog navigation group: BAIC E130/E150 / BAIC Senova D20 / BAIC X25; supply precise vehicle details for selection
  • Use the displayed OE information: Available on Request
  • Check the contact surface and opening shape against the original arrangement
  • Use the original item to establish the visible outline
  • Check the delivered item against the agreed images before workshop use
  • Obtain confirmed shipment measurements for delivery estimates
  • Confirm the fog light cover position from the actual vehicle
  • Use the approved comparison details in the purchase enquiry
  • Photograph the mounting area before the old item is removed

Fog Light Cover – JI’AO Xingwang / Chenggong Yihao / BAIC E130/E150

  • This item is grouped with JI'AO Xingwang / Chenggong Yihao / BAIC E130/E150; confirm its individual application
  • Number reference for this enquiry: Available on Request
  • Use the original fog light cover as the starting point for selection
  • Have dispatch packing confirmed before scheduling collection
  • Confirm the individual item before discussing final transport charges
  • Keep the original part available for the first delivery comparison
  • Ask for clarification where the end shape or rear clips is uncertain
  • Provide a clear comparison of the mounting tabs
  • Show an intact comparison area if the existing part has been damaged

Front Bumper – BAIC E130/E150 / BAIC Senova D20 / BAIC X25

  • Group designation: BAIC E130/E150 / BAIC Senova D20 / BAIC X25; verify the required application separately
  • OE enquiry reference: Available on Request
  • Give the intended receiving market and number of units needed
  • Check the delivered item against the agreed images before workshop use
  • Review the side fixing areas, then clarify the wheel-arch meeting points
  • Show an intact comparison area if the existing part has been damaged
  • Match the required front bumper configuration to the pictured item
  • Check the packed size and carton quantity before freight is booked
  • Record the original arrangement of the panel alignment

Front Bumper – BAIC E130/E150 / BAIC Senova D20 / BAIC X25 – Image B

  • Catalog navigation group: BAIC E130/E150 / BAIC Senova D20 / BAIC X25; supply precise vehicle details for selection
  • The OE reference is Available on Request
  • Capture a useful angle of the wheel-arch meeting points
  • Ask for the carton arrangement applicable to the agreed quantity
  • Confirm the front bumper position from the actual vehicle
  • Retain delivery labels until the supplied item has been accepted
  • Record any unreadable or missing original identification in the enquiry
  • State the required units and destination for a commercial offer
  • Show both the lower profile and corner shape in the identification images

Front Bumper – JI’AO Xingwang / Chenggong Yihao / BAIC E130/E150

  • This listing sits under JI'AO Xingwang / Chenggong Yihao / BAIC E130/E150; confirm the configuration for your vehicle
  • Identification number information: Available on Request
  • Take separate detail views for the rear fastening areas and support interfaces when needed
  • Use the original item to establish the corner shape
  • Photograph the original front bumper in its normal position
  • Check the delivered item against the agreed images before workshop use
  • Request price information after resolving the part identification
  • Add close-ups that answer a specific identification question
  • Use packing note 145*35*60CM/5PCS when discussing dispatch details

Front Bumper Bracket – BAIC E130/E150 / BAIC Senova D20 / BAIC X25

  • This listing sits under BAIC E130/E150 / BAIC Senova D20 / BAIC X25; confirm the configuration for your vehicle
  • Identification number information: Available on Request
  • Check the support angle in the intended vehicle position
  • Request shipping dimensions after confirming the item and volume
  • Inspect the complete part's condition before fitting preparation
  • Include the delivery location when requesting supply terms
  • Include the attachment offsets with a second view of the contact faces
  • Keep the required orientation clear in all comparison photographs
  • Establish the required front bumper bracket from vehicle-specific evidence

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue