Showing 1–12 of 24 results

BKC3-50-C11 Fog Light Cover – MAZDA CX-5’17 / MZD 3’14

  • Vehicle group shown: MAZDA CX-5'17 / MZD 3'14; check the particular application
  • OE information for the enquiry: BKC3-50-C11
  • Ask for price and lead time after the part version is agreed
  • Keep the whole part in frame and add close-ups of concealed attachments
  • Confirm units per carton before calculating freight
  • The comparison should cover both the clip spacing and installed orientation
  • Include the fog light cover location in the technical enquiry
  • Check the curved edge profile from the same angle on both parts
  • Inspect the curved edge profile on arrival and compare it with the approved images

BKC3-51-040AA/030AA Headlight Assembly – MAZDA CX-5’17 / MZD 3’14

  • Vehicle group shown: MAZDA CX-5'17 / MZD 3'14; check the particular application
  • Identification reference — BKC3-51-040AA/030AA
  • Request carton dimensions after confirming the order quantity
  • Photograph the original part before dismantling obscures its orientation
  • Review the locating pin arrangement while the item is unpacked for inspection
  • Add a close photograph showing the rear housing shape
  • Select this headlight assembly only after checking the vehicle installation
  • Check the locating pin arrangement together with the lamp body depth
  • Send the purchase quantity and receiving location with your enquiry

BKC3-51-040AA/030AA Headlight Assembly – MAZDA CX-5’17 / MZD 3’14 – Image B

  • Vehicle group shown: MAZDA CX-5'17 / MZD 3'14; check the particular application
  • Reference to include when requesting details: BKC3-51-040AA/030AA
  • Confirm the vehicle-side opening at the intended mounting location
  • Request commercial terms using the confirmed part details
  • Keep the whole part in frame and add close-ups of concealed attachments
  • Ask for clarification if the mounting ear positions or housing perimeter differs
  • Use full views of the original headlight assembly for identification
  • Confirm protective packing before dispatch arrangements are made
  • Keep the packaging until the mounting ear positions has been checked

BKC3-51-3F0 Tail Light Assembly – MAZDA CX-5’17 / MZD 3’14

  • Use catalog group MAZDA CX-5'17 / MZD 3'14 to begin a vehicle-specific enquiry
  • OE information for the enquiry: BKC3-51-3F0
  • Check the lamp body depth from the same angle on both parts
  • Hold installation if comparison of the rear housing shape leaves an unresolved mismatch
  • Provide the intended delivery market with the purchase requirement
  • Keep the whole part in frame and add close-ups of concealed attachments
  • Use clear views of the connector location and rear housing shape for comparison with the original part
  • Check export packing information with the availability response
  • Select this tail light assembly only after checking the vehicle installation

BKC3-51-3G0 Tail Light Assembly – MAZDA CX-5’17 / MZD 3’14

  • This listing belongs to catalog group MAZDA CX-5'17 / MZD 3'14; verify the required model
  • Reference to include when requesting details: BKC3-51-3G0
  • Compare the locating pin arrangement with the original item
  • Specify the required vehicle position when requesting availability
  • Compare the tail light assembly photograph with the complete removed item
  • Ask for the proposed packing arrangement for this order
  • Inspect the locating pin arrangement on arrival and compare it with the approved images
  • Keep the whole part in frame and add close-ups of concealed attachments
  • The comparison should cover both the housing perimeter and vehicle-side opening

BKC3-51-650 Brake Light – MAZDA CX-5’17 / MZD 3’14

  • Use catalog group MAZDA CX-5'17 / MZD 3'14 to begin a vehicle-specific enquiry
  • Part-number reference shown for this item: BKC3-51-650
  • Ask for price and lead time after the part version is agreed
  • Confirm the lens outline before assessing the vehicle-side opening
  • Report any difference found during the locating pin arrangement comparison with photographs
  • Supply an installed view plus photographs of both sides of the removed part
  • Check export packing information with the availability response
  • Select this brake light only after checking the vehicle installation
  • Check the locating pin arrangement from the same angle on both parts

BKD1-50-C21 Fog Light Cover – MAZDA CX-5’17 / MZD 3’14

  • Catalog grouping lists MAZDA CX-5'17 / MZD 3'14; it does not establish shared fitment
  • Identification reference — BKD1-50-C21
  • Packing details are available with the quotation
  • Document the arrival condition, including the panel contact area
  • Identify the required fog light cover with its installed position clearly shown
  • Ask for clarification if the edge alignment or retaining tab layout differs
  • Add a ruler in the photograph when a dimension needs clarification
  • State the required units and delivery country for a quotation
  • Compare the panel contact area with the original item

BLE7-50-C11 Fog Light Cover – MAZDA CX-5’17 / MZD 3’14

  • Choose the actual vehicle from catalog group MAZDA CX-5'17 / MZD 3'14 before ordering
  • OE reference: BLE7-50-C11
  • Include the fog light cover location in the technical enquiry
  • Photograph the surrounding trim clearance; include a second view of the panel contact area
  • Hold installation if comparison of the surrounding trim clearance leaves an unresolved mismatch
  • Include the vehicle identification details with the comparison images
  • Ask for price and lead time after the part version is agreed
  • Confirm units per carton before calculating freight
  • Inspect the retaining tab layout before approving the replacement

Door Mirror – MAZDA CX-5’17 / MZD 3’14

  • Catalog grouping lists MAZDA CX-5'17 / MZD 3'14; it does not establish shared fitment
  • Part-number reference shown for this item: Available on Request
  • Keep the whole part in frame and add close-ups of concealed attachments
  • Include the door mirror location in the technical enquiry
  • Request carton dimensions after confirming the order quantity
  • Use clear views of the stud spacing and mirror glass shape for comparison with the original part
  • Send the purchase quantity and receiving location with your enquiry
  • Resolve any difference in the base angle before purchase
  • Check the stud spacing against the original installation before workshop use

Fog Light – MAZDA CX-5’17 / MZD 3’14

  • For identification within MAZDA CX-5'17 / MZD 3'14, specify the exact vehicle and build details
  • Identification reference — Available on Request
  • Confirm the locating pin arrangement before assessing the visible lens markings
  • Obtain shipment measurements when the quantity is settled
  • Use similar camera angles for the original and proposed replacement
  • Review the locating pin arrangement while the item is unpacked for inspection
  • State the required units and delivery country for a quotation
  • Use full views of the original fog light for identification
  • Use the lens outline as one point of comparison

Fog Light – MAZDA CX-5’17 / MZD 3’14 – Image B

  • Choose the actual vehicle from catalog group MAZDA CX-5'17 / MZD 3'14 before ordering
  • Reference to include when requesting details: Available on Request
  • Photograph the connector location; include a second view of the lamp body depth
  • Review the connector location while the item is unpacked for inspection
  • Check export packing information with the availability response
  • Add a close photograph showing the retaining points
  • Identify the required fog light with its installed position clearly shown
  • Request commercial terms using the confirmed part details
  • Include the vehicle identification details with the comparison images

Fog Light Cover – MAZDA CX-5’17 / MZD 3’14

  • Catalog model group: MAZDA CX-5'17 / MZD 3'14; confirm the exact vehicle version
  • OE information for the enquiry: Available on Request
  • Review the outer border alongside the original part's opening shape
  • Confirm the rear fixing points at the intended mounting location
  • Check the outer border against the original installation before workshop use
  • Use similar camera angles for the original and proposed replacement
  • Ask for the proposed packing arrangement for this order
  • Specify the required vehicle position when requesting availability
  • Confirm that the fog light cover shown is the required version

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue