Showing 1–12 of 19 results

64101-H9000 Radiator Support for KIA Rio’17 Sedan / Rio’17 Hatchback

  • Use 64101-H9000 only after connector and mounts agree
  • Inspect fastener spacing before preparing a quotation for 64101-H9000
  • Ask the workshop to compare 64101-H9000 without modifying brackets
  • Supply clear fixing-point evidence for the 64101-H9000 enquiry
  • Request current radiator support carton dimensions and pieces per carton
  • Photograph 64101-H9000 from front and reverse directions
  • State quantity and destination for the KIA Rio'17 Sedan / Rio'17 Hatchback B2B enquiry
  • Check the radiator support mounting tabs before ordering
  • Do not finalize KIA Rio'17 Sedan / Rio'17 Hatchback radiator support fitment until mounting tabs and installed position agree

64900-H8200 Front Bumper Support for KIA Rio’17 Sedan / Rio’17 Hatchback

  • KIA Rio'17 Sedan / Rio'17 Hatchback Front Bumper Support reference numbers: 64900-H8200
  • Use 64900-H8200 only after connector and mounts agree
  • Measure the front bumper support mounting tabs against the removed component
  • Inspect the front bumper support reverse face before accepting 64900-H8200
  • Photograph 64900-H8200 from front and reverse directions
  • Treat 64900-H8200 as a cross-reference, not the only fitment test
  • Review the KIA Rio'17 Sedan / Rio'17 Hatchback opening before approving 64900-H8200
  • Confirm mounting tabs, then verify the 64900-H8200 outer edge
  • Measure KIA Rio'17 Sedan / Rio'17 Hatchback fastener spacing for market-variant checking

86350-H9000 Grille for KIA Rio’17 Sedan / Rio’17 Hatchback

  • Review the KIA Rio'17 Sedan / Rio'17 Hatchback opening before approving 86350-H9000
  • Confirm 86350-H9000 clearances beside surrounding components
  • Validate the grille outline associated with 86350-H9000
  • Do not finalize KIA Rio'17 Sedan / Rio'17 Hatchback grille fitment until bracket profile and panel clearance agree
  • Request current grille carton dimensions and pieces per carton
  • Component under review: Grille
  • Confirm the KIA Rio'17 Sedan / Rio'17 Hatchback grille front, rear, left or right position where applicable
  • Photograph 86350-H9000 from front and reverse directions
  • Inspect the grille reverse face before accepting 86350-H9000

86511-H9000 Front Bumper for KIA Rio’17 Sedan / Rio’17 Hatchback

  • Inspect the front bumper electrical connector against the removed component
  • Use a vehicle-side image to confirm 86511-H9000 and housing depth
  • Provide installed, reverse-side and front bumper fixing-point photographs
  • Use 86511-H9000 only after connector and mounts agree
  • Begin 86511-H9000 selection with a direct mounting-interface comparison
  • Compare electrical connector while reviewing the 86511-H9000 configuration
  • Request current front bumper carton dimensions and pieces per carton
  • Match 86511-H9000 to the removed sample at every fixing point
  • Confirm the KIA Rio'17 Sedan / Rio'17 Hatchback front bumper front, rear, left or right position where applicable

86610-H9210 Rear Bumper With Sensor Hole for KIA Rio’17 Sedan / Rio’17 Hatchback

  • Keep 86610-H9210 with the vehicle identification photograph
  • Match the pictured rear bumper with sensor hole construction to the original KIA Rio'17 Sedan / Rio'17 Hatchback part
  • Review the KIA Rio'17 Sedan / Rio'17 Hatchback opening before approving 86610-H9210
  • Confirm KIA Rio'17 Sedan / Rio'17 Hatchback terminal layout for market-variant checking
  • Do a loose trial placement before releasing the 86610-H9210 order
  • KIA Rio'17 Sedan / Rio'17 Hatchback Rear Bumper With Sensor Hole reference numbers: 86610-H9210
  • State quantity and destination for the KIA Rio'17 Sedan / Rio'17 Hatchback B2B enquiry
  • Component under review: Rear Bumper With Sensor Hole
  • Validate the rear bumper with sensor hole outline associated with 86610-H9210

86611-H9000 Rear Bumper for KIA Rio’17 Sedan / Rio’17 Hatchback

  • Begin 86611-H9000 selection with a direct mounting-interface comparison
  • Provide installed, reverse-side and rear bumper fixing-point photographs
  • KIA Rio'17 Sedan / Rio'17 Hatchback Rear Bumper reference numbers: 86611-H9000
  • Use a vehicle-side image to confirm 86611-H9000 and left/right orientation
  • Ask the workshop to compare 86611-H9000 without modifying brackets
  • Validate the rear bumper outline associated with 86611-H9000
  • Do a loose trial placement before releasing the 86611-H9000 order
  • Compare the original KIA Rio'17 Sedan / Rio'17 Hatchback part with 86611-H9000
  • Component under review: Rear Bumper

86613-H9000 / 86614-H9000 Rear Bumper Bracker for KIA Rio’17 Sedan / Rio’17 Hatchback

  • Document KIA Rio'17 Sedan / Rio'17 Hatchback corner geometry for side confirmation
  • Keep 86613-H9000 with the vehicle identification photograph
  • Ask the workshop to compare 86613-H9000 without modifying brackets
  • KIA Rio'17 Sedan / Rio'17 Hatchback Rear Bumper Bracker reference numbers: 86613-H9000 / 86614-H9000
  • Provide installed, reverse-side and rear bumper bracker fixing-point photographs
  • Confirm the KIA Rio'17 Sedan / Rio'17 Hatchback rear bumper bracker front, rear, left or right position where applicable
  • Record corner geometry when checking the KIA Rio'17 Sedan / Rio'17 Hatchback 86613-H9000 option
  • Check 86613-H9000 orientation before side selection
  • Validate the rear bumper bracker outline associated with 86613-H9000

86631-H9000 Rear Bumper Support for KIA Rio’17 Sedan / Rio’17 Hatchback

  • Component under review: Rear Bumper Support
  • Review the KIA Rio'17 Sedan / Rio'17 Hatchback opening before approving 86631-H9000
  • Use panel clearance to distinguish the KIA Rio'17 Sedan / Rio'17 Hatchback rear bumper support version
  • KIA application: Rio'17 Sedan / Rio'17 Hatchback
  • Compare the original KIA Rio'17 Sedan / Rio'17 Hatchback part with 86631-H9000
  • Treat 86631-H9000 as a cross-reference, not the only fitment test
  • Confirm 86631-H9000 clearances beside surrounding components
  • Do a loose trial placement before releasing the 86631-H9000 order
  • Match 86631-H9000 to the removed sample at every fixing point

86631-H9200 Rear Bumper Support for KIA Rio’17 Sedan / Rio’17 Hatchback

  • Match 86631-H9200 to the removed sample at every fixing point
  • Use 86631-H9200 only after connector and mounts agree
  • Validate the rear bumper support outline associated with 86631-H9200
  • KIA Rio'17 Sedan / Rio'17 Hatchback Rear Bumper Support reference numbers: 86631-H9200
  • Include 86631-H9200 in the technical approval request
  • Ask the workshop to compare 86631-H9200 without modifying brackets
  • Confirm 86631-H9200 clearances beside surrounding components
  • Do not finalize KIA Rio'17 Sedan / Rio'17 Hatchback rear bumper support fitment until outer contour and vehicle aperture agree
  • Use a vehicle-side image to confirm 86631-H9200 and vehicle aperture

86650-H9040 Rear Bumper Lower for KIA Rio’17 Sedan / Rio’17 Hatchback

  • Confirm mounting tabs, then verify the 86650-H9040 outer edge
  • Compare the original KIA Rio'17 Sedan / Rio'17 Hatchback part with 86650-H9040
  • KIA application: Rio'17 Sedan / Rio'17 Hatchback
  • Supply clear fixing-point evidence for the 86650-H9040 enquiry
  • Check whether 86650-H9040 matches the photographed KIA Rio'17 Sedan / Rio'17 Hatchback construction
  • Review the KIA Rio'17 Sedan / Rio'17 Hatchback opening before approving 86650-H9040
  • Record fastener spacing when checking the KIA Rio'17 Sedan / Rio'17 Hatchback 86650-H9040 option
  • State quantity and destination for the KIA Rio'17 Sedan / Rio'17 Hatchback B2B enquiry
  • Request current rear bumper lower carton dimensions and pieces per carton

86650-H9230 Rear Bumper Lower for KIA Rio’17 Sedan / Rio’17 Hatchback

  • Provide installed, reverse-side and rear bumper lower fixing-point photographs
  • Component under review: Rear Bumper Lower
  • Review the KIA Rio'17 Sedan / Rio'17 Hatchback opening before approving 86650-H9230
  • Use KIA Rio'17 Sedan / Rio'17 Hatchback production details to review 86650-H9230
  • Confirm 86650-H9230 clearances beside surrounding components
  • Inspect the rear bumper lower reverse face before accepting 86650-H9230
  • Inspect seal boundary before preparing a quotation for 86650-H9230
  • KIA Rio'17 Sedan / Rio'17 Hatchback Rear Bumper Lower reference numbers: 86650-H9230
  • Do a loose trial placement before releasing the 86650-H9230 order

86821-H9000 / 86822-H9000 Rear Fender Liner for KIA Rio’17 Sedan / Rio’17 Hatchback

  • Compare retaining clips while reviewing the 86821-H9000 configuration
  • Compare the original KIA Rio'17 Sedan / Rio'17 Hatchback part with 86821-H9000
  • Document the rear fender liner retaining clips during a dry fit
  • Match 86821-H9000 to the removed sample at every fixing point
  • Supply clear fixing-point evidence for the 86821-H9000 enquiry
  • Provide installed, reverse-side and rear fender liner fixing-point photographs
  • Review the KIA Rio'17 Sedan / Rio'17 Hatchback opening before approving 86821-H9000
  • State quantity and destination for the KIA Rio'17 Sedan / Rio'17 Hatchback B2B enquiry
  • Inspect the rear fender liner reverse face before accepting 86821-H9000

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue