Showing 1–12 of 22 results

55100-FD100 Crossmember Rear for KIA Rio ’01 / Rio ’03

  • KIA crossmember rear listed for KIA Rio ’01 / Rio ’03
  • Searchable OE reference: 55100-FD100
  • Configuration checks: left and right mounting ends, bolt-hole centres and bracket orientation
  • Interface review: clearance from nearby panels and overall span
  • Record the mounting position shown by the removed crossmember rear
  • Use the vehicle component as the final physical comparison sample
  • Confirm packing before freight calculation
  • Commercial request: identify volume and delivery location
  • Attach vehicle-side photograph and adjacent-panel image to the product enquiry

64100-FD000 Panel for KIA Rio ’01 / Rio ’03

  • Vehicle designation for this panel: KIA Rio ’01 / Rio ’03
  • OE lookup term: 64100-FD000
  • Component identifiers: wheel-arch or lamp clearance, opening and hole pattern and left or right orientation
  • Installation-area review: panel contour and bolt and clip locations
  • Verify orientation at the KIA Rio ’01 / Rio ’03 installation area before purchase
  • Check the existing part against the listed KIA Rio ’01 / Rio ’03 configuration
  • Confirm export packaging for the destination market
  • Trade pricing request: state order size and shipping market
  • Identification photos should contain lower-retainer view and lower-retainer view

86511-FD040 Front Bumper for KIA Rio ’01 / Rio ’03

  • KIA application shown on this page: KIA Rio ’01 / Rio ’03
  • Identification number: 86511-FD040
  • Part recognition points: upper edge alignment below the lamps, overall corner curvature and bracket and bolt-hole spacing
  • Installation comparison: lamp or grille openings and side-retainer engagement
  • Identify whether one side or a matched pair is required
  • Compare the removed front bumper with the product image before ordering
  • Export packing: 200 × 52 × 36CM / 5PCS
  • Trade pricing request: state order size and shipping market
  • Comparison photographs: capture full component outline plus fixing-point close-up

86525-FD000 / 86526-FD000 Light Frame for KIA Rio ’01 / Rio ’03

  • Light Frame matched to the KIA designation KIA Rio ’01 / Rio ’03
  • OE cross-reference: 86525-FD000 / 86526-FD000
  • Key matching points: mounting tabs around the housing, left or right installation position and clearance beside bumper and grille
  • Mounting check: lens profile and outer edge and electrical plug and pin layout
  • State the exact vehicle side or component location for this light frame
  • Photograph the removed item before dismantling adjacent hardware
  • Packing data: 53 × 47 × 52CM / 200PCS
  • Export offer input: purchase volume and destination country
  • Submit adjacent-panel image together with fastener detail for checking

86530-FD000 Front Bumper Support for KIA Rio ’01 / Rio ’03

  • Front Bumper Support supply entry for the KIA model label KIA Rio ’01 / Rio ’03
  • OE reference shown: 86530-FD000
  • Part recognition points: upper edge alignment below the lamps, overall corner curvature and bracket and bolt-hole spacing
  • Mounting check: lamp or grille openings and side-retainer engagement
  • Verify required orientation against the original part
  • Review the complete product image beside the part taken from the vehicle
  • Request pieces per carton with the B2B offer
  • Price and lead-time check: specify pieces and destination
  • Show the mounting configuration using fixing-point close-up plus underside image

86630-FD000 Rear Bumper Support for KIA Rio ’01 / Rio ’03

  • Rear Bumper Support catalogue application: KIA Rio ’01 / Rio ’03
  • Replacement reference: 86630-FD000
  • Version checkpoints: side-retainer engagement, upper edge alignment below the lamps and overall corner curvature
  • Position check: bracket and bolt-hole spacing and lamp or grille openings
  • Confirm component location before stock is allocated
  • Confirm visible shape and reverse-side mounting details together
  • Obtain current packing details before shipment planning
  • Availability enquiry: provide units needed and delivery point
  • Useful visual evidence includes rear mounting view with connector close-up

92101-FD010 Headlight Assembly (Yellow) for KIA Rio ’01 / Rio ’03

  • Headlight Assembly (Yellow) matched to the KIA designation KIA Rio ’01 / Rio ’03
  • OE cross-reference: 92101-FD010
  • Primary fitment checks: mounting tabs around the housing, left or right installation position and clearance beside bumper and grille
  • Installation comparison: lens profile and outer edge and electrical plug and pin layout
  • State the exact vehicle side or component location for this headlight assembly (yellow)
  • Keep the original headlight assembly (yellow) available for a side-by-side review
  • Recorded carton: 79 × 45 × 48CM / 6PCS
  • Stock enquiry: include requested quantity and destination
  • Provide one original-label photograph and one installation-opening picture

92101-FD030 / 92102-FD030 Headlight Assembly for KIA Rio ’01 / Rio ’03

  • Headlight Assembly supply entry for the KIA model label KIA Rio ’01 / Rio ’03
  • OE reference shown: 92101-FD030 / 92102-FD030
  • Physical comparison: electrical plug and pin layout, mounting tabs around the housing and left or right installation position
  • Vehicle opening check: clearance beside bumper and grille and lens profile and outer edge
  • Specify the installation side in the KIA Rio ’01 / Rio ’03 quotation request
  • Retain the original item until the replacement version is accepted
  • Packing data: 79 × 45 × 48CM / 6PCS
  • Trade pricing request: state order size and shipping market
  • A clear rear mounting view should accompany the fixing-point close-up

92201-FD000 / 92202-FD000 Fog Light Side Marker Light for KIA Rio ’01 / Rio ’03

  • KIA application shown on this page: KIA Rio ’01 / Rio ’03
  • Identification numbers: 92201-FD000 / 92202-FD000
  • Visual match points: clearance beside bumper and grille, lens profile and outer edge and electrical plug and pin layout
  • Attachment review: mounting tabs around the housing and left or right installation position
  • State the exact vehicle side or component location for this fog light side marker light
  • Use the vehicle component as the final physical comparison sample
  • Packing data: 74 × 42 × 32CM / 20PCS
  • Wholesale quotation requires quantity plus destination
  • Reference images should include original-label photograph plus corner-profile view

92401-FD020 / 92402-FD020 Tail Light Assembly for KIA Rio ’01 / Rio ’03

  • Tail Light Assembly supply entry for the KIA model label KIA Rio ’01 / Rio ’03
  • OE reference shown: 92401-FD020 / 92402-FD020
  • Primary fitment checks: left or right installation position, clearance beside bumper and grille and lens profile and outer edge
  • Vehicle-side check: electrical plug and pin layout and mounting tabs around the housing
  • Confirm the required left, right, front or rear installation position
  • Confirm visible shape and reverse-side mounting details together
  • Recorded carton: 96 × 50 × 55CM / 10PCS
  • Availability enquiry: provide units needed and delivery point
  • Attach vehicle-side photograph and lower-retainer view to the product enquiry
  • Rio 2001 / Rio 2003 tail-light pair: verify 92401-FD020 / 92402-FD020
  • Compare the outer lens curve, body-side edge, sockets and mounting studs
  • Label left and right and photograph both rear openings before quotation

92431-FD300 Rear Fog Light for KIA Rio ’01 / Rio ’03

  • Vehicle designation for this rear fog light: KIA Rio ’01 / Rio ’03
  • OE lookup term: 92431-FD300
  • Fitment identifiers: lens profile and outer edge, electrical plug and pin layout and mounting tabs around the housing
  • Mounting check: left or right installation position and clearance beside bumper and grille
  • Identify whether one side or a matched pair is required
  • Retain the original item until the replacement version is accepted
  • Request pieces per carton with the B2B offer
  • Availability enquiry: provide units needed and delivery point
  • Identification photos should contain vehicle-side photograph and chassis-plate image

Door Mirror for KIA Rio ’01 / Rio ’03

  • Door Mirror matched to the KIA designation KIA Rio ’01 / Rio ’03
  • No OE number is stated; identify the item from its photographed configuration
  • Selection criteria: mounting stud pattern, manual or electric adjustment type and connector shape and pin count
  • Installation comparison: left or right door position and door-base footprint
  • Specify the installation side in the KIA Rio ’01 / Rio ’03 quotation request
  • Check the existing part against the listed KIA Rio ’01 / Rio ’03 configuration
  • Shipping pack: 77 × 36 × 71CM / 10PCS
  • Commercial request: identify volume and delivery location
  • Comparison photographs: capture original-label photograph plus installation-opening picture

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue