Showing 1–12 of 43 results

29110-2T000 Engine Under Guard Board for KIA K5 ’11-’13

  • Compare the original KIA K5 '11-'13 part with 29110-2T000
  • Record fastener spacing when checking the KIA K5 '11-'13 29110-2T000 option
  • Inspect the engine under guard board reverse face before accepting 29110-2T000
  • Request current engine under guard board carton dimensions and pieces per carton
  • Validate the engine under guard board outline associated with 29110-2T000
  • KIA application: K5 '11-'13
  • Check 29110-2T000 orientation before side selection
  • Confirm the KIA K5 '11-'13 engine under guard board front, rear, left or right position where applicable
  • Check whether 29110-2T000 matches the photographed KIA K5 '11-'13 construction

29120-2T000 / 29130-2T000 Cover Board for KIA K2 ’16 / K5 ’11-’13

  • Validate the cover board outline associated with 29120-2T000
  • Inspect the cover board reverse face before accepting 29120-2T000
  • Record seal boundary when checking the KIA K2 '16 / K5 '11-'13 29120-2T000 option
  • Photograph 29120-2T000 from front and reverse directions
  • Ask the workshop to compare 29120-2T000 without modifying brackets
  • Use 29120-2T000 only after connector and mounts agree
  • State quantity and destination for the KIA K2 '16 / K5 '11-'13 B2B enquiry
  • Begin 29120-2T000 selection with a direct mounting-interface comparison
  • Confirm the KIA K2 '16 / K5 '11-'13 cover board front, rear, left or right position where applicable

64101-2T000 Radiator Support for KIA K2 ’16 / K5 ’11-’13

  • Use 64101-2T000 only after connector and mounts agree
  • State quantity and destination for the KIA K2 '16 / K5 '11-'13 B2B enquiry
  • Confirm KIA K2 '16 / K5 '11-'13 seal boundary for version selection
  • Supply clear fixing-point evidence for the 64101-2T000 enquiry
  • Confirm lens profile, then verify the 64101-2T000 outer edge
  • Ask the workshop to compare 64101-2T000 without modifying brackets
  • Keep 64101-2T000 with the vehicle identification photograph
  • Begin 64101-2T000 selection with a direct mounting-interface comparison
  • Use KIA K2 '16 / K5 '11-'13 production details to review 64101-2T000

86350-2T000 Grille for KIA K2 ’16 / K5 ’11-’13

  • Check whether 86350-2T000 matches the photographed KIA K2 '16 / K5 '11-'13 construction
  • Compare mounting tabs while reviewing the 86350-2T000 configuration
  • Do a loose trial placement before releasing the 86350-2T000 order
  • KIA application: K2 '16 / K5 '11-'13
  • Match 86350-2T000 to the removed sample at every fixing point
  • Ask the workshop to compare 86350-2T000 without modifying brackets
  • Verify the grille mounting tabs against the removed component
  • Provide installed, reverse-side and grille fixing-point photographs
  • Use installed position to distinguish the KIA K2 '16 / K5 '11-'13 grille version

86361-2T000 Lock Guard Board for KIA K2 ’16 / K5 ’11-’13

  • Use left/right orientation to distinguish the KIA K2 '16 / K5 '11-'13 lock guard board version
  • Confirm the KIA K2 '16 / K5 '11-'13 lock guard board front, rear, left or right position where applicable
  • State quantity and destination for the KIA K2 '16 / K5 '11-'13 B2B enquiry
  • Photograph 86361-2T000 from front and reverse directions
  • Confirm 86361-2T000 clearances beside surrounding components
  • Inspect KIA K2 '16 / K5 '11-'13 seal boundary for quotation preparation
  • Inspect seal boundary before preparing a quotation for 86361-2T000
  • Check whether 86361-2T000 matches the photographed KIA K2 '16 / K5 '11-'13 construction
  • Match the pictured lock guard board construction to the original KIA K2 '16 / K5 '11-'13 part

86511-2T000 Front Bumper for KIA K5 ’11-’13

  • Use housing depth to distinguish the KIA K5 '11-'13 front bumper version
  • Request current front bumper carton dimensions and pieces per carton
  • Treat 86511-2T000 as a cross-reference, not the only fitment test
  • Compare the original KIA K5 '11-'13 part with 86511-2T000
  • Do not finalize KIA K5 '11-'13 front bumper fitment until electrical connector and housing depth agree
  • Review the front bumper electrical connector using the original installation point
  • Inspect the front bumper reverse face before accepting 86511-2T000
  • Provide installed, reverse-side and front bumper fixing-point photographs
  • Include 86511-2T000 in the technical approval request

86513-2T000 / 86514-2T000 Front Bumper Holder for KIA K5 ’11-’13

  • Compare mounting tabs while reviewing the 86513-2T000 configuration
  • Confirm 86513-2T000 clearances beside surrounding components
  • Review the KIA K5 '11-'13 opening before approving 86513-2T000
  • Record fastener spacing when checking the KIA K5 '11-'13 86513-2T000 option
  • Use KIA K5 '11-'13 production details to review 86513-2T000
  • KIA application: K5 '11-'13
  • Use a vehicle-side image to confirm 86513-2T000 and installed position
  • Confirm the KIA K5 '11-'13 front bumper holder front, rear, left or right position where applicable
  • Do a loose trial placement before releasing the 86513-2T000 order

86530-2T000 Front Bumper Support for KIA K5 ’11-’13

  • Confirm attachment points, then verify the 86530-2T000 outer edge
  • Inspect KIA K5 '11-'13 guide slots for side confirmation
  • Include 86530-2T000 in the technical approval request
  • Do not finalize KIA K5 '11-'13 front bumper support fitment until attachment points and adjacent panel gap agree
  • Do a loose trial placement before releasing the 86530-2T000 order
  • Provide installed, reverse-side and front bumper support fixing-point photographs
  • Match the pictured front bumper support construction to the original KIA K5 '11-'13 part
  • State quantity and destination for the KIA K5 '11-'13 B2B enquiry
  • Compare the original KIA K5 '11-'13 part with 86530-2T000

86551-2T000 / 86552-2T000 Fog Light Cover for KIA K2 ’16 / K5 ’11-’13

  • Include 86551-2T000 in the technical approval request
  • Check whether 86551-2T000 matches the photographed KIA K2 '16 / K5 '11-'13 construction
  • Review the KIA K2 '16 / K5 '11-'13 opening before approving 86551-2T000
  • Check 86551-2T000 orientation before side selection
  • Resolve any vehicle aperture difference affecting the 86551-2T000 version
  • KIA K2 '16 / K5 '11-'13 Fog Light Cover reference numbers: 86551-2T000 / 86552-2T000
  • Compare outer contour while reviewing the 86551-2T000 configuration
  • Use vehicle aperture to distinguish the KIA K2 '16 / K5 '11-'13 fog light cover version
  • Record surface finish when checking the KIA K2 '16 / K5 '11-'13 86551-2T000 option

86551-2T100 / 86552-2T100 Fog Light Cover for KIA K2 ’16 / K5 ’11-’13

  • Match 86551-2T100 to the removed sample at every fixing point
  • Provide installed, reverse-side and fog light cover fixing-point photographs
  • Match the pictured fog light cover construction to the original KIA K2 '16 / K5 '11-'13 part
  • Compare the original KIA K2 '16 / K5 '11-'13 part with 86551-2T100
  • Use installed position to distinguish the KIA K2 '16 / K5 '11-'13 fog light cover version
  • Photograph 86551-2T100 from front and reverse directions
  • Ask the workshop to compare 86551-2T100 without modifying brackets
  • Record fastener spacing when checking the KIA K2 '16 / K5 '11-'13 86551-2T100 option
  • Packing reference for this fog light cover: 86*58*71CM/60PCS

86553-2T010 / 86554-2T010 Fog Light Cover for KIA K2 ’16 / K5 ’11-’13

  • Inspect fastener spacing before preparing a quotation for 86553-2T010
  • State quantity and destination for the KIA K2 '16 / K5 '11-'13 B2B enquiry
  • Do a loose trial placement before releasing the 86553-2T010 order
  • Photograph 86553-2T010 from front and reverse directions
  • Confirm the KIA K2 '16 / K5 '11-'13 fog light cover front, rear, left or right position where applicable
  • Component under review: Fog Light Cover
  • Request current fog light cover carton dimensions and pieces per carton
  • Check whether 86553-2T010 matches the photographed KIA K2 '16 / K5 '11-'13 construction
  • Confirm 86553-2T010 clearances beside surrounding components

86561-2T000 Bumper Grille for KIA K2 ’16 / K5 ’11-’13

  • State quantity and destination for the KIA K2 '16 / K5 '11-'13 B2B enquiry
  • Use a vehicle-side image to confirm 86561-2T000 and vehicle aperture
  • Match 86561-2T000 to the removed sample at every fixing point
  • Do a loose trial placement before releasing the 86561-2T000 order
  • Check 86561-2T000 orientation before side selection
  • Use vehicle aperture to distinguish the KIA K2 '16 / K5 '11-'13 bumper grille version
  • Inspect the bumper grille outer contour using the original installation point
  • Compare the original KIA K2 '16 / K5 '11-'13 part with 86561-2T000
  • Record surface finish when checking the KIA K2 '16 / K5 '11-'13 86561-2T000 option

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue