Showing 1–12 of 43 results

213-1601-A/U 1-82210-002-0 Fog Light for ISUZU D-max Tfr ’21 / Tfr ’06 / Npr,nhr ’04-05 600P

  • The authoritative OE entry is 213-1601-A/U 1-82210-002-0
  • Keep the carton until attachment points and the complete outline are accepted
  • Compare attachment points with the removed part prior to verification
  • Use consistent camera angles when comparing the pictured item with the removed part
  • Retain an ISUZU D-max Tfr '21 / Tfr '06 / Npr,nhr '04-05 600P application record showing this fog light, attachment points and the surrounding mounting area
  • Application listed in the source: ISUZU D-max Tfr '21 / Tfr '06 / Npr,nhr '04-05 600P
  • Review guide slots together with the outside contour
  • Complete technical verification prior to asking for final freight terms
  • The ISUZU source sheet packing cell reads 55*33*44CM/50PCS

213-2007-UE-C Fog Light for ISUZU D-max Tfr ’21 / Tfr ’06 / Npr,nhr ’04-05 600P

  • Vehicle record for this listing: ISUZU D-max Tfr '21 / Tfr '06 / Npr,nhr '04-05 600P
  • Retain an ISUZU D-max Tfr '21 / Tfr '06 / Npr,nhr '04-05 600P application record showing this fog light, outer shape and the surrounding mounting area
  • Ask for stock and commercial terms only after the pictured version is confirmed
  • Review surface finish together with the outside contour
  • Carton dimensions and pieces per carton require confirmation
  • Use a close view of outer shape for technical confirmation
  • Show the complete edge profile and every attachment area in the technical request
  • Compare the delivered item with approved images and review surface finish
  • The authoritative OE entry is 213-2007-UE-C

Bumper Boaer Lower for ISUZU D-max Tfr ’21 / Tfr ’06 / Npr,nhr ’04-05 600P

  • Do not begin installation if rear construction differs from the approved sample
  • Retain an ISUZU D-max Tfr '21 / Tfr '06 / Npr,nhr '04-05 600P application record showing this bumper boaer lower, visible outline and the surrounding mounting area
  • Complete technical verification prior to asking for final freight terms
  • Source vehicle designation: ISUZU D-max Tfr '21 / Tfr '06 / Npr,nhr '04-05 600P
  • Place the original and replacement side by side to review visible outline
  • Use the generic OE message rather than guessing a number
  • Show the complete edge profile and every attachment area in the technical request
  • Photograph visible outline and the complete reverse face
  • Obtain current carton information with the stock response

Bumper Support for ISUZU Npr,nhr ’04-05 600P / Npr,nhr 700P / FB415 FM515

  • Show the complete edge profile and every attachment area in the technical request
  • Measure housing depth where a visual check is not conclusive
  • Recorded model coverage: ISUZU Npr,nhr '04-05 600P / Npr,nhr 700P / FB415 FM515
  • No packing reference is available in the ISUZU source sheet
  • Photograph the arrival condition of surrounding clearance for the receiving record
  • Identify the needed front, rear, left or right position prior to commercial review
  • Retain an ISUZU Npr,nhr '04-05 600P / Npr,nhr 700P / FB415 FM515 application record showing this bumper support, connector interface and the surrounding mounting area
  • Compare connector interface with the removed part prior to verification
  • Do not derive an OE code from the title, image name or model year

Corner Light for ISUZU D-max Tfr ’21 / Tfr ’06 / Npr,nhr ’04-05 600P

  • Retain an ISUZU D-max Tfr '21 / Tfr '06 / Npr,nhr '04-05 600P application record showing this corner light, bracket profile and the surrounding mounting area
  • Confirm panel alignment at the actual vehicle opening
  • No source-backed OE number is available for this listing
  • The ISUZU source sheet associates this item with ISUZU D-max Tfr '21 / Tfr '06 / Npr,nhr '04-05 600P
  • At receipt, inspect bracket profile prior to removing all protective packaging
  • Use 75*43.5*58CM/50PCS as a preliminary packing reference
  • Request availability with the application, quantity and comparison images
  • Compare bracket profile with the removed part prior to verification
  • Use straight-on and angled images so the outer shape and rear structure are visible

Corner Light for ISUZU Npr,nhr ’04-05 600P / Npr,nhr 700P / FB415 FM515

  • Use a close view of bracket profile for technical confirmation
  • Recheck the source carton entry 73*47*59CM/20PCS prior to shipment
  • Retain an ISUZU Npr,nhr '04-05 600P / Npr,nhr 700P / FB415 FM515 application record showing this corner light, bracket profile and the surrounding mounting area
  • Include a full-part image plus close views of brackets, connectors and guides
  • Use the generic OE message rather than guessing a number
  • Record transport damage that could affect panel alignment
  • Add destination details after fitment and side selection are complete
  • Vehicle record for this listing: ISUZU Npr,nhr '04-05 600P / Npr,nhr 700P / FB415 FM515
  • Compare bracket profile with the removed part prior to verification

Door Mirror for ISUZU D-max Tfr ’21 / Tfr ’06 / Npr,nhr ’04-05 600P

  • Provide the application, quantity and ship-to country in the B2B enquiry
  • Photograph the arrival condition of edge contour for the receiving record
  • Place the original and replacement side by side to review retaining clips
  • Add a ruler reference when mounting-point spacing cannot be judged from a photograph
  • The ISUZU source sheet associates this item with ISUZU D-max Tfr '21 / Tfr '06 / Npr,nhr '04-05 600P
  • The ISUZU source sheet leaves the packing field blank
  • The ISUZU source sheet provides no OE value for this part
  • Measure reverse-side ribs where a visual check is not conclusive
  • Retain an ISUZU D-max Tfr '21 / Tfr '06 / Npr,nhr '04-05 600P application record showing this door mirror, retaining clips and the surrounding mounting area

Door Shel for ISUZU D-max Tfr ’21 / Tfr ’06 / Npr,nhr ’04-05 600P

  • Confirm carton size and quantity per carton prior to freight calculation
  • Retain an ISUZU D-max Tfr '21 / Tfr '06 / Npr,nhr '04-05 600P application record showing this door shel, retaining clips and the surrounding mounting area
  • Photograph the required side and the surrounding panel gap during a loose trial fit
  • Document edge contour prior to releasing the purchase order
  • Identify the needed front, rear, left or right position prior to commercial review
  • The ISUZU source sheet provides no OE value for this part
  • Do not begin installation if reverse-side ribs differs from the approved sample
  • Photograph retaining clips and the complete reverse face
  • The ISUZU source sheet associates this item with ISUZU D-max Tfr '21 / Tfr '06 / Npr,nhr '04-05 600P

Door Strip for ISUZU D-max Tfr ’21 / Tfr ’06 / Npr,nhr ’04-05 600P

  • Ask for stock and commercial terms only after the pictured version is confirmed
  • Source vehicle designation: ISUZU D-max Tfr '21 / Tfr '06 / Npr,nhr '04-05 600P
  • Confirm nearby component clearance at the actual vehicle opening
  • Keep the original part until nearby component clearance is verified
  • Verify the delivered side and configuration prior to checking nearby component clearance
  • Retain an ISUZU D-max Tfr '21 / Tfr '06 / Npr,nhr '04-05 600P application record showing this door strip, part curvature and the surrounding mounting area
  • Confirm carton size and quantity per carton prior to freight calculation
  • Add a ruler reference when mounting-point spacing cannot be judged from a photograph
  • No confirmed OE reference accompanies this photographed entry

Face Plate for ISUZU Npr,nhr ’04-05 600P / Npr,nhr 700P / FB415 FM515

  • Use straight-on and angled images so the outer shape and rear structure are visible
  • Confirm carton size and quantity per carton prior to freight calculation
  • Retain an ISUZU Npr,nhr '04-05 600P / Npr,nhr 700P / FB415 FM515 application record showing this face plate, part curvature and the surrounding mounting area
  • Review connection points together with the outside contour
  • The supplied model field reads ISUZU Npr,nhr '04-05 600P / Npr,nhr 700P / FB415 FM515
  • Support the part evenly so handling does not distort part curvature
  • Place the original and replacement side by side to review part curvature
  • Provide the application, quantity and ship-to country in the B2B enquiry
  • Identification must rely on the pictured part because the OE cell is empty

Fale Dail for ISUZU Npr,nhr ’04-05 600P / Npr,nhr 700P / FB415 FM515

  • No OE identifier is supplied in the ISUZU source sheet
  • Confirm left or right orientation at the actual vehicle opening
  • Use the approved comparison evidence when requesting price and lead time
  • Check the front and reverse views for differences in lens profile
  • Current export packing must be confirmed with the quotation
  • The ISUZU source sheet associates this item with ISUZU Npr,nhr '04-05 600P / Npr,nhr 700P / FB415 FM515
  • Photograph the arrival condition of left or right orientation for the receiving record
  • Retain an ISUZU Npr,nhr '04-05 600P / Npr,nhr 700P / FB415 FM515 application record showing this fale dail, lens profile and the surrounding mounting area
  • Send clear pictures of the original part prior to it is removed from the vehicle

Fog Light for ISUZU Npr,nhr ’04-05 600P / Npr,nhr 700P / FB415 FM515

  • Attach images of the vehicle opening, complete part and mounting details
  • Keep the original part until adjacent-panel gap is verified
  • Retain an ISUZU Npr,nhr '04-05 600P / Npr,nhr 700P / FB415 FM515 application record showing this fog light, attachment points and the surrounding mounting area
  • Revalidate 76*47*36CM/20PCS after the final quantity is known
  • Compare attachment points with the removed part prior to verification
  • Send the model designation, requested units and delivery market for availability checking
  • Use the generic OE message rather than guessing a number
  • Record transport damage that could affect adjacent-panel gap
  • Begin identification with the ISUZU Npr,nhr '04-05 600P / Npr,nhr 700P / FB415 FM515 designation

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue