Showing 1–12 of 45 results

213-1601-A/U 1-82210-002-0 Fog Light for ISUZU D-max Tfr ’21 / Tfr ’06 / Npr,nhr ’04-05 600P

  • The authoritative OE entry is 213-1601-A/U 1-82210-002-0
  • Keep the carton until attachment points and the complete outline are accepted
  • Compare attachment points with the removed part prior to verification
  • Use consistent camera angles when comparing the pictured item with the removed part
  • Retain an ISUZU D-max Tfr '21 / Tfr '06 / Npr,nhr '04-05 600P application record showing this fog light, attachment points and the surrounding mounting area
  • Application listed in the source: ISUZU D-max Tfr '21 / Tfr '06 / Npr,nhr '04-05 600P
  • Review guide slots together with the outside contour
  • Complete technical verification prior to asking for final freight terms
  • The ISUZU source sheet packing cell reads 55*33*44CM/50PCS

213-2007-UE-C Fog Light for ISUZU D-max Tfr ’21 / Tfr ’06 / Npr,nhr ’04-05 600P

  • Vehicle record for this listing: ISUZU D-max Tfr '21 / Tfr '06 / Npr,nhr '04-05 600P
  • Retain an ISUZU D-max Tfr '21 / Tfr '06 / Npr,nhr '04-05 600P application record showing this fog light, outer shape and the surrounding mounting area
  • Ask for stock and commercial terms only after the pictured version is confirmed
  • Review surface finish together with the outside contour
  • Carton dimensions and pieces per carton require confirmation
  • Use a close view of outer shape for technical confirmation
  • Show the complete edge profile and every attachment area in the technical request
  • Compare the delivered item with approved images and review surface finish
  • The authoritative OE entry is 213-2007-UE-C

Bumper Boaer Lower for ISUZU D-max Tfr ’21 / Tfr ’06 / Npr,nhr ’04-05 600P

  • Do not begin installation if rear construction differs from the approved sample
  • Retain an ISUZU D-max Tfr '21 / Tfr '06 / Npr,nhr '04-05 600P application record showing this bumper boaer lower, visible outline and the surrounding mounting area
  • Complete technical verification prior to asking for final freight terms
  • Source vehicle designation: ISUZU D-max Tfr '21 / Tfr '06 / Npr,nhr '04-05 600P
  • Place the original and replacement side by side to review visible outline
  • Use the generic OE message rather than guessing a number
  • Show the complete edge profile and every attachment area in the technical request
  • Photograph visible outline and the complete reverse face
  • Obtain current carton information with the stock response

Bumper Bracket for ISUZU D-max Tfr ’18 / D-max Tfr ’21

  • Keep the original part until panel alignment is verified
  • Retain labels and packaging while any question about bracket profile is resolved
  • Complete technical verification prior to asking for final freight terms
  • Send clear pictures of the original part prior to it is removed from the vehicle
  • Match the image to the ISUZU D-max Tfr '18 / D-max Tfr '21 vehicle record
  • Request packing data for the required purchase quantity
  • Retain an ISUZU D-max Tfr '18 / D-max Tfr '21 application record showing this bumper bracket, bracket profile and the surrounding mounting area
  • Compare bracket profile with the removed part prior to verification
  • Do not derive an OE code from the title, image name or model year

Corner Light for ISUZU D-max Tfr ’21 / Tfr ’06 / Npr,nhr ’04-05 600P

  • Retain an ISUZU D-max Tfr '21 / Tfr '06 / Npr,nhr '04-05 600P application record showing this corner light, bracket profile and the surrounding mounting area
  • Confirm panel alignment at the actual vehicle opening
  • No source-backed OE number is available for this listing
  • The ISUZU source sheet associates this item with ISUZU D-max Tfr '21 / Tfr '06 / Npr,nhr '04-05 600P
  • At receipt, inspect bracket profile prior to removing all protective packaging
  • Use 75*43.5*58CM/50PCS as a preliminary packing reference
  • Request availability with the application, quantity and comparison images
  • Compare bracket profile with the removed part prior to verification
  • Use straight-on and angled images so the outer shape and rear structure are visible

Cornering Lamp for ISUZU D-max Tfr ’18 / D-max Tfr ’21

  • Ask the supplier to calculate export packing for the requested volume
  • Use service access to separate similar-looking versions
  • Retain an ISUZU D-max Tfr '18 / D-max Tfr '21 application record showing this cornering lamp, overall dimensions and the surrounding mounting area
  • Send clear pictures of the original part prior to it is removed from the vehicle
  • The source OE field is blank; keep product metadata empty
  • Provide the application, quantity and ship-to country in the B2B enquiry
  • Photograph overall dimensions and the complete reverse face
  • Support the part evenly so handling does not distort overall dimensions
  • This source row identifies ISUZU D-max Tfr '18 / D-max Tfr '21

Door Mirror for ISUZU D-max Tfr ’21 / Tfr ’06 / Npr,nhr ’04-05 600P

  • Provide the application, quantity and ship-to country in the B2B enquiry
  • Photograph the arrival condition of edge contour for the receiving record
  • Place the original and replacement side by side to review retaining clips
  • Add a ruler reference when mounting-point spacing cannot be judged from a photograph
  • The ISUZU source sheet associates this item with ISUZU D-max Tfr '21 / Tfr '06 / Npr,nhr '04-05 600P
  • The ISUZU source sheet leaves the packing field blank
  • The ISUZU source sheet provides no OE value for this part
  • Measure reverse-side ribs where a visual check is not conclusive
  • Retain an ISUZU D-max Tfr '21 / Tfr '06 / Npr,nhr '04-05 600P application record showing this door mirror, retaining clips and the surrounding mounting area

Door Shel for ISUZU D-max Tfr ’21 / Tfr ’06 / Npr,nhr ’04-05 600P

  • Confirm carton size and quantity per carton prior to freight calculation
  • Retain an ISUZU D-max Tfr '21 / Tfr '06 / Npr,nhr '04-05 600P application record showing this door shel, retaining clips and the surrounding mounting area
  • Photograph the required side and the surrounding panel gap during a loose trial fit
  • Document edge contour prior to releasing the purchase order
  • Identify the needed front, rear, left or right position prior to commercial review
  • The ISUZU source sheet provides no OE value for this part
  • Do not begin installation if reverse-side ribs differs from the approved sample
  • Photograph retaining clips and the complete reverse face
  • The ISUZU source sheet associates this item with ISUZU D-max Tfr '21 / Tfr '06 / Npr,nhr '04-05 600P

Door Strip for ISUZU D-max Tfr ’21 / Tfr ’06 / Npr,nhr ’04-05 600P

  • Ask for stock and commercial terms only after the pictured version is confirmed
  • Source vehicle designation: ISUZU D-max Tfr '21 / Tfr '06 / Npr,nhr '04-05 600P
  • Confirm nearby component clearance at the actual vehicle opening
  • Keep the original part until nearby component clearance is verified
  • Verify the delivered side and configuration prior to checking nearby component clearance
  • Retain an ISUZU D-max Tfr '21 / Tfr '06 / Npr,nhr '04-05 600P application record showing this door strip, part curvature and the surrounding mounting area
  • Confirm carton size and quantity per carton prior to freight calculation
  • Add a ruler reference when mounting-point spacing cannot be judged from a photograph
  • No confirmed OE reference accompanies this photographed entry

Fog Lamp Cover Without Hole for ISUZU D-max Tfr ’18 / D-max Tfr ’21

  • Keep the original part until nearby component clearance is verified
  • No OE identifier is supplied in the ISUZU source sheet
  • Capture the installed location prior to workshop disassembly begins
  • Use ISUZU D-max Tfr '18 / D-max Tfr '21 as the recorded application
  • Include order volume, destination and required left or right side where applicable
  • Use a close view of part curvature for technical confirmation
  • Carton dimensions and pieces per carton require confirmation
  • Retain an ISUZU D-max Tfr '18 / D-max Tfr '21 application record showing this fog lamp cover without hole, part curvature and the surrounding mounting area
  • Support the part evenly so handling does not distort part curvature

Fog Lamp Set for ISUZU D-max Tfr ’18 / D-max Tfr ’21

  • Leave OE metadata blank and request the number when needed
  • Keep a vehicle identification image with the part comparison images
  • The ISUZU source sheet leaves the packing field blank
  • Retain an ISUZU D-max Tfr '18 / D-max Tfr '21 application record showing this fog lamp set, outer shape and the surrounding mounting area
  • Use the goods-in check to confirm surface finish and visible edge condition
  • Keep the original part until vehicle opening is verified
  • Measure surface finish where a visual check is not conclusive
  • Ask for stock and commercial terms only after the pictured version is confirmed
  • The application evidence names ISUZU D-max Tfr '18 / D-max Tfr '21

Fog Light Cover for ISUZU D-max Tfr ’18 / D-max Tfr ’21

  • Use a close view of part curvature for technical confirmation
  • Confirm carton size and quantity per carton prior to freight calculation
  • Compare the delivered item with approved images and review connection points
  • Provide one installed view, one reverse-side view and close-ups of the fixing points
  • Retain an ISUZU D-max Tfr '18 / D-max Tfr '21 application record showing this fog light cover, part curvature and the surrounding mounting area
  • Application listed in the source: ISUZU D-max Tfr '18 / D-max Tfr '21
  • Check connection points without bending brackets or clips
  • No confirmed OE reference accompanies this photographed entry
  • Request availability with the application, quantity and comparison images

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue