Showing 1–12 of 39 results

04711-TF0-0ZZ Front Bumper for FIAT FIT/JAZZ’09 / ACCORD’03(CM4/5/6) / Palio 5D’02/SIENA 4D’02

  • Confirm left or right orientation at the actual vehicle opening
  • Source vehicle designation: FIAT FIT/JAZZ'09 / ACCORD'03(CM4/5/6) / Palio 5D'02/SIENA 4D'02
  • Keep a FIAT FIT/JAZZ'09 / ACCORD'03(CM4/5/6) / Palio 5D'02/SIENA 4D'02 sourcing file showing this front bumper, lens profile and the vehicle opening
  • Verify the delivered side and configuration before checking left or right orientation
  • Quote 04711-TF0-0ZZ exactly as written in the source
  • Packing starts from the source note 187*24*47CM
  • Compare lens profile with the removed part before fitment decision
  • Attach comparison photos of the vehicle opening, complete catalogued part and mounting details
  • Quote the full vehicle designation and required units in the purchase request

04711-TF0-G00 Front Bumper for FIAT FIT/JAZZ’09 / ACCORD’03(CM4/5/6) / Palio 5D’02/SIENA 4D’02

  • Source vehicle designation: FIAT FIT/JAZZ'09 / ACCORD'03(CM4/5/6) / Palio 5D'02/SIENA 4D'02
  • Use a close view of connector interface for technical confirmation
  • Recheck the source carton entry 154*30*50CM before shipment
  • List the intended vehicle, catalogued part position, purchase volume and destination
  • Check the front and reverse views for differences in connector interface
  • Use consistent camera angles when comparing the pictured item with the removed part
  • Carry 04711-TF0-G00 unchanged into the quotation
  • Keep a FIAT FIT/JAZZ'09 / ACCORD'03(CM4/5/6) / Palio 5D'02/SIENA 4D'02 sourcing file showing this front bumper, connector interface and the vehicle opening
  • Record transport damage that could affect surrounding clearance

04711-TF0-G00ZZ Rear Bumper for FIAT FIT/JAZZ’09 / ACCORD’03(CM4/5/6) / Palio 5D’02/SIENA 4D’02

  • Quote 04711-TF0-G00ZZ exactly as written in the source
  • Review seal boundary together with the outside contour
  • The FIAT product worksheet leaves the packing field blank
  • Check the front and reverse views for differences in lens profile
  • Catalog application shown for the item: FIAT FIT/JAZZ'09 / ACCORD'03(CM4/5/6) / Palio 5D'02/SIENA 4D'02
  • Keep a FIAT FIT/JAZZ'09 / ACCORD'03(CM4/5/6) / Palio 5D'02/SIENA 4D'02 sourcing file showing this rear bumper, lens profile and the vehicle opening
  • List the intended vehicle, catalogued part position, purchase volume and destination
  • Photograph the required side and the surrounding panel gap during a loose trial fit
  • Hold a mismatched item from workshop use and document seal boundary

04715-TF0-G00 Rear Bumper for FIAT FIT/JAZZ’09 / ACCORD’03(CM4/5/6) / Palio 5D’02/SIENA 4D’02

  • Record transport damage that could affect market-specific details
  • Attach comparison photos of the vehicle opening, complete catalogued part and mounting details
  • Keep a FIAT FIT/JAZZ'09 / ACCORD'03(CM4/5/6) / Palio 5D'02/SIENA 4D'02 sourcing file showing this rear bumper, visible outline and the vehicle opening
  • Check rear construction without bending brackets or clips
  • Compare visible outline with the removed part before fitment decision
  • The listed packing reference is 118*15*57CM
  • The authoritative OE entry is 04715-TF0-G00
  • Use FIAT FIT/JAZZ'09 / ACCORD'03(CM4/5/6) / Palio 5D'02/SIENA 4D'02 as the recorded application
  • State the required quantity, installation position and receiving country

34301-S5H-TO2 Side Lamp for FIAT FIT/JAZZ’09 / ACCORD’03(CM4/5/6) / Palio 5D’02/SIENA 4D’02

  • Retain labels and packaging while any question about attachment points is resolved
  • Use FIAT FIT/JAZZ'09 / ACCORD'03(CM4/5/6) / Palio 5D'02/SIENA 4D'02 as the recorded application
  • Cross-reference text from the source: 34301-S5H-TO2
  • Keep a FIAT FIT/JAZZ'09 / ACCORD'03(CM4/5/6) / Palio 5D'02/SIENA 4D'02 sourcing file showing this side lamp, attachment points and the vehicle opening
  • Request availability with the application, quantity and comparison comparison photos
  • Confirm adjacent-panel gap at the actual vehicle opening
  • Add a ruler reference when mounting-point spacing cannot be judged from a photograph
  • No packing reference is available in the FIAT product worksheet
  • Check guide slots without bending brackets or clips

51746913 Fog Light for FIAT Palio 5D’02/SIENA 4D’02 / DOBLO’02-05 / PALIO’05/IDEA’04 / Palio ’12

  • Keep a FIAT Palio 5D'02/SIENA 4D'02 / DOBLO'02-05 / PALIO'05/IDEA'04 / Palio '12 sourcing file showing this fog light, upper mounts and the vehicle opening
  • Use straight-on and angled images so the outer shape and rear structure are visible
  • Keep the original catalogued part until front or rear position is verified
  • No packing reference is available in the FIAT product worksheet
  • Provide the application, quantity and ship-to country in the B2B enquiry
  • Photograph the arrival condition of front or rear position for the receiving record
  • The FIAT product worksheet associates this item with FIAT Palio 5D'02/SIENA 4D'02 / DOBLO'02-05 / PALIO'05/IDEA'04 / Palio '12
  • Document front or rear position before releasing the purchase order
  • Use the exact source OE text 51746913; do not infer additional numbers

51755051/4 Headlight Assembly for FIAT Palio 5D’02/SIENA 4D’02 / DOBLO’02-05 / PALIO’05/IDEA’04 / Palio ’12

  • Photograph the required side and the surrounding panel gap during a loose trial fit
  • Keep a FIAT Palio 5D'02/SIENA 4D'02 / DOBLO'02-05 / PALIO'05/IDEA'04 / Palio '12 sourcing file showing this headlight assembly, mounting tabs and the vehicle opening
  • Carry 51755051/4 unchanged into the quotation
  • Packing data recorded in the FIAT product worksheet: 78*55*50CM/4PCS
  • Place the original and replacement side by side to review mounting tabs
  • Check the front and reverse views for differences in mounting tabs
  • Photograph the arrival condition of installed position for the receiving record
  • The supplied model field reads FIAT Palio 5D'02/SIENA 4D'02 / DOBLO'02-05 / PALIO'05/IDEA'04 / Palio '12
  • State the required quantity, installation position and receiving country

60400-TG5-H00ZZ Framework for Water Tanks for FIAT FIT/JAZZ’09 / ACCORD’03(CM4/5/6) / Palio 5D’02/SIENA 4D’02

  • The application evidence names FIAT FIT/JAZZ'09 / ACCORD'03(CM4/5/6) / Palio 5D'02/SIENA 4D'02
  • Place the original and replacement side by side to review visible outline
  • Record transport damage that could affect market-specific details
  • Complete technical fitment decision before asking for final freight terms
  • Ask the supplier to calculate export packing for the requested volume
  • Keep a FIAT FIT/JAZZ'09 / ACCORD'03(CM4/5/6) / Palio 5D'02/SIENA 4D'02 sourcing file showing this framework for water tanks, visible outline and the vehicle opening
  • Use a close view of visible outline for technical confirmation
  • Provide one installed view, one reverse-side view and close-ups of the fixing points
  • Retain source OE 60400-TG5-H00ZZ without expansion

661-1403 | R/L:7112370401129 License Light and Fog Light for FIAT FIT/JAZZ’09 / ACCORD’03(CM4/5/6) / Palio 5D’02/SIENA 4D’02

  • Include a full-part image plus close views of brackets, connectors and guides
  • Document installed position before releasing the purchase order
  • Recorded model coverage: FIAT FIT/JAZZ'09 / ACCORD'03(CM4/5/6) / Palio 5D'02/SIENA 4D'02
  • Do not begin installation if fastener spacing differs from the approved sample
  • Check fastener spacing without bending brackets or clips
  • Carry 661-1403 | R/L:7112370401129 unchanged into the quotation
  • Separate part confirmation from carton and transport calculation
  • Recheck the source carton entry 68*47*34CM/50PCS 35*40*42CM/30PCS before shipment
  • Keep a FIAT FIT/JAZZ'09 / ACCORD'03(CM4/5/6) / Palio 5D'02/SIENA 4D'02 sourcing file showing this license light and fog light, mounting tabs and the vehicle opening

661-1913-UE Tail Light Assembly for FIAT FIT/JAZZ’09 / ACCORD’03(CM4/5/6) / Palio 5D’02/SIENA 4D’02

  • Do not begin installation if surface finish differs from the approved sample
  • Keep the original catalogued part until vehicle opening is verified
  • Provide the application, quantity and ship-to country in the B2B enquiry
  • The listed packing reference is 86*38*52CM/10PCS
  • The supplied model field reads FIAT FIT/JAZZ'09 / ACCORD'03(CM4/5/6) / Palio 5D'02/SIENA 4D'02
  • Check surface finish without bending brackets or clips
  • Keep a FIAT FIT/JAZZ'09 / ACCORD'03(CM4/5/6) / Palio 5D'02/SIENA 4D'02 sourcing file showing this tail light assembly, outer shape and the vehicle opening
  • Show the complete edge profile and every attachment area in the technical request
  • Use the exact source OE text 661-1913-UE; do not infer additional numbers

71101-SDE-TOOZZ Front Bumper for FIAT FIT/JAZZ’09 / ACCORD’03(CM4/5/6) / Palio 5D’02/SIENA 4D’02

  • Ask for stock and commercial terms only after the pictured version is confirmed
  • Vehicle record for this listing: FIAT FIT/JAZZ'09 / ACCORD'03(CM4/5/6) / Palio 5D'02/SIENA 4D'02
  • Attach comparison photos of the vehicle opening, complete catalogued part and mounting details
  • No packing reference is available in the FIAT product worksheet
  • Keep the OE string 71101-SDE-TOOZZ exactly as supplied
  • Document service access before releasing the purchase order
  • Keep a FIAT FIT/JAZZ'09 / ACCORD'03(CM4/5/6) / Palio 5D'02/SIENA 4D'02 sourcing file showing this front bumper, overall dimensions and the vehicle opening
  • Place the original and replacement side by side to review overall dimensions
  • Verify the delivered side and configuration before checking service access

71121-SDE-TOO Grille for FIAT FIT/JAZZ’09 / ACCORD’03(CM4/5/6) / Palio 5D’02/SIENA 4D’02

  • Request current carton dimensions and pieces per carton
  • Begin identification with the FIAT FIT/JAZZ'09 / ACCORD'03(CM4/5/6) / Palio 5D'02/SIENA 4D'02 designation
  • Attach comparison photos of the vehicle opening, complete catalogued part and mounting details
  • Complete technical fitment decision before asking for final freight terms
  • Place the original and replacement side by side to review part curvature
  • Keep a FIAT FIT/JAZZ'09 / ACCORD'03(CM4/5/6) / Palio 5D'02/SIENA 4D'02 sourcing file showing this grille, part curvature and the vehicle opening
  • Use the goods-in check to confirm connection points and visible edge condition
  • Inspect connection points under clear workshop lighting
  • Quote 71121-SDE-TOO exactly as written in the source

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue

PRODUCTS

HOME  /  PRODUCTS

HYUNDAI PARTS

HOME  /  PRODUCTS  /  HYUNDAI

HYUNDAI MODELS

85 models from our automotive parts catalogue