96610863 Front Bumper Meshowork Cover for Daewoo Damas-I / Damas-Ii / Cruze ’09

Front Bumper Meshowork Cover for Daewoo Damas-I / Damas-Ii / Cruze ’09: Review the identification points below before adding this component to a repair estimate. The component belongs to the bumper inspection group.

Product Specifications

Procurement Checklist

This front bumper meshowork cover is associated with Daewoo Damas-I / Damas-Ii / Cruze ’09. Use 96610863 to reduce search ambiguity, then verify whether the vehicle needs the pictured orientation. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Workshop Comparison

• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings

The importing distributor should compare side-retainer engagement, inspect upper edge alignment below the lamps, and align lamp or grille openings before the stock request is released. This route applies to the front bumper meshowork cover shown for Daewoo Damas-I / Damas-Ii / Cruze ’09.

If images accompany the enquiry, include a removed-part overview, a straight-on view, and a chassis-plate image. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The importing distributor can begin with removed-part overview to compare side-retainer engagement. A second image should show overall corner curvature from straight-on view. Before the stock request is released, inspect lamp or grille openings and note any difference from the removed component. Keep these observations with the Daewoo Damas-I / Damas-Ii / Cruze ’09 vehicle record.

A vehicle inspector should photograph lamp or grille openings from a straight-on view, then document overall corner curvature before the repair schedule is finalized. The installation team should capture bracket and bolt-hole spacing from an underside image, then record bracket and bolt-hole spacing before the stock request is released. The service adviser should photograph upper edge alignment below the lamps from a side-profile photograph, then photograph overall corner curvature before the purchase order is issued. The procurement contact should cross-check overall corner curvature from a removed-part overview, then record overall corner curvature before the fitment decision is signed off.

Repair Planning Notes

Do not enlarge holes, bend brackets or force electrical plugs to compensate for a mismatch. Recorded packing is 76 × 32 × 36CM / 80SET; reconfirm current packing when freight is quoted.

Fitment Evidence

Distributors may request pricing by stating volume, destination and the vehicle identification data held. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Fitment FAQ

Which vehicle record belongs with this product?

This page associates the front bumper meshowork cover with Daewoo Damas-I / Damas-Ii / Cruze ’09. The vehicle record and original component should agree with the pictured version.

What evidence is useful for a fitment review?

Use the old component to check side-retainer engagement and overall corner curvature. Also state the installation side or position in the enquiry.

What should be included in a B2B enquiry?

Distributors may request pricing by stating volume, destination and the vehicle identification data held. Include clear original-part photographs when the exact configuration needs further review.