96730214 / 96730213 Backup Mirror(3lines) – Clear Side Marker for Daewoo Hrv / Lacetti / Lemans ’96 / Tico

Backup Mirror(3lines) – Clear Side Marker for Daewoo Hrv / Lacetti / Lemans ’96 / Tico: Use the model label as a starting point, then verify the actual mounting layout on the vehicle. The component belongs to the lighting inspection group.

Product Specifications

Workshop Comparison

This backup mirror(3lines) – clear side marker is associated with Daewoo Hrv / Lacetti / Lemans ’96 / Tico. If 96730214 / 96730213 appears on the original label or casting, continue by confirming holes, clips and clearance. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Ordering Information

• Clearance beside bumper and grille
• Lens profile and outer edge
• Electrical plug and pin layout
• Mounting tabs around the housing
• Left or right installation position

The installation team should measure clearance beside bumper and grille, cross-check lens profile and outer edge, and confirm left or right installation position before the replacement is test-positioned. This route applies to the backup mirror(3lines) – clear side marker shown for Daewoo Hrv / Lacetti / Lemans ’96 / Tico.

If images accompany the enquiry, include a straight-on view, a fastener detail, and an adjacent-panel image. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The installation team can begin with straight-on view to measure clearance beside bumper and grille. A second image should show electrical plug and pin layout from fastener detail. Before the replacement is test-positioned, cross-check left or right installation position and note any difference from the removed component. Keep these observations with the Daewoo Hrv / Lacetti / Lemans ’96 / Tico vehicle record.

A vehicle inspector should cross-check mounting tabs around the housing from an installation-opening picture, then review left or right installation position before the delivery plan is confirmed. A workshop estimator should document mounting tabs around the housing from a vehicle-side photograph, then photograph mounting tabs around the housing before the commercial request is submitted. A collision-repair specialist should compare electrical plug and pin layout from a lower-retainer view, then measure mounting tabs around the housing before the replacement is test-positioned. The installation team should evaluate clearance beside bumper and grille from a vehicle-side photograph, then verify electrical plug and pin layout before the shipment is booked.

Installation Planning

A qualified installer should resolve alignment or wiring differences before the vehicle returns to service. No packing entry is published here; request current carton and quantity information with the quotation.

Configuration Check

Repair shops should attach vehicle and removed-part evidence when asking for availability and freight. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Fitment FAQ

Which Hyundai model does this page cover?

This backup mirror(3lines) – clear side marker appears under Daewoo Hrv / Lacetti / Lemans ’96 / Tico. Review the exact vehicle version rather than relying on the model name by itself.

What evidence is useful for a fitment review?

Ask the workshop to inspect clearance beside bumper and grille together with electrical plug and pin layout. VIN or chassis information can clarify market-specific differences.

What information is needed for a quotation?

Repair shops should attach vehicle and removed-part evidence when asking for availability and freight. Providing the vehicle record at the start reduces follow-up questions during quotation.