965481810 / 965481809 Inner Lining(Front) for Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti

Inner Lining(Front) for Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti: Review the identification points below before adding this component to a repair estimate. The component belongs to the body inspection group.

Product Specifications

Repair Planning Notes

This inner lining(front) is associated with Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti. Compare 965481810 / 965481809 character by character with the marking on the removed component. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Purchase Preparation

• Wheel-arch or lamp clearance
• Opening and hole pattern
• Left or right orientation
• Panel contour
• Bolt and clip locations

The procurement contact should evaluate wheel-arch or lamp clearance, note opening and hole pattern, and compare bolt and clip locations before the delivery plan is confirmed. This route applies to the inner lining(front) shown for Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti.

If images accompany the enquiry, include an installation-opening picture, an underside image, and a full component outline. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The procurement contact can begin with installation-opening picture to evaluate wheel-arch or lamp clearance. A second image should show left or right orientation from underside image. Before the delivery plan is confirmed, note bolt and clip locations and note any difference from the removed component. Keep these observations with the Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti vehicle record.

The parts coordinator should capture opening and hole pattern from an installation-opening picture, then mark left or right orientation before the commercial request is submitted. The stock controller should mark opening and hole pattern from an upper-edge image, then verify opening and hole pattern before the quotation is approved. A workshop estimator should document panel contour from a fastener detail, then capture opening and hole pattern before the purchase order is issued. The repair planner should measure wheel-arch or lamp clearance from a lower-retainer view, then note wheel-arch or lamp clearance before the purchase order is issued.

Technical Comparison Notes

Protect painted and finished surfaces during handling, and verify panel gaps before tightening fasteners. No packing entry is published here; request current carton and quantity information with the quotation.

Buyer Verification Notes

A complete sourcing request names the quantity, delivery market and the comparison information used. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Common Workshop Questions

What model is associated with this replacement part?

The associated model designation is Daewoo Nubira / Lacetti ’03 / Optra / Optra Advance ’09 / Hrv / Lacetti. Confirm the body or electrical configuration relevant to this inner lining(front).

How can an incorrect order be avoided?

Fitment evidence should show wheel-arch or lamp clearance, left or right orientation and the position where the component will be installed.

Which details help prepare shipping terms?

A complete sourcing request names the quantity, delivery market and the comparison information used. Keep each requested product on a separate line when several parts share one shipment.