93730214 / 93730213 Door Mirror for Daewoo Nubira ’00 / Nubira / Lacetti ’03 Optra

Door Mirror for Daewoo Nubira ’00 / Nubira / Lacetti ’03 Optra: Use the model label as a starting point, then verify the actual mounting layout on the vehicle. The component belongs to the mirror inspection group.

Product Specifications

Repair Planning Notes

This door mirror is associated with Daewoo Nubira ’00 / Nubira / Lacetti ’03 Optra. Treat 93730214 / 93730213 as an identification route, then validate the component at the actual mounting area. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Vehicle-Side Evidence

• Manual or electric adjustment type
• Connector shape and pin count
• Left or right door position
• Door-base footprint
• Mounting stud pattern

The repair planner should evaluate manual or electric adjustment type, cross-check connector shape and pin count, and confirm mounting stud pattern before the commercial request is submitted. This route applies to the door mirror shown for Daewoo Nubira ’00 / Nubira / Lacetti ’03 Optra.

If images accompany the enquiry, include a rear mounting view, a full component outline, and a rear mounting view. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The repair planner can begin with rear mounting view to evaluate manual or electric adjustment type. A second image should show left or right door position from full component outline. Before the commercial request is submitted, cross-check mounting stud pattern and note any difference from the removed component. Keep these observations with the Daewoo Nubira ’00 / Nubira / Lacetti ’03 Optra vehicle record.

The stock controller should document left or right door position from a removed-part overview, then inspect connector shape and pin count before the commercial request is submitted. A collision-repair specialist should trace left or right door position from an underside image, then note connector shape and pin count before the commercial request is submitted. A body-shop buyer should verify mounting stud pattern from an adjacent-panel image, then inspect door-base footprint before the packing plan is prepared. A vehicle inspector should measure mounting stud pattern from a straight-on view, then trace left or right door position before the fitment decision is signed off.

Inspection Route

Complete any functional test appropriate to the component before closing trim or returning the vehicle. Recorded packing is 70 × 45 × 42CM; reconfirm current packing when freight is quoted.

Identification Summary

A complete sourcing request names the quantity, delivery market and the comparison information used. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Fitment FAQ

Which Hyundai model does this page cover?

The associated model designation is Daewoo Nubira ’00 / Nubira / Lacetti ’03 Optra. Confirm the body or electrical configuration relevant to this door mirror.

What should a workshop inspect before purchase?

Use the old component to check manual or electric adjustment type and left or right door position. Also state the installation side or position in the enquiry.

Which details help prepare shipping terms?

A complete sourcing request names the quantity, delivery market and the comparison information used. State the required side or installation position where that detail applies.