Rear Bumper Bracket for Daewoo Cielo ’96 / Rarcer ’00 / Nexia ’08

Rear Bumper Bracket for Daewoo Cielo ’96 / Rarcer ’00 / Nexia ’08: Parts selection should begin with the removed component and the exact vehicle record. The component belongs to the bumper inspection group.

Product Specifications

Technical Comparison Notes

This rear bumper bracket is associated with Daewoo Cielo ’96 / Rarcer ’00 / Nexia ’08. Identification depends on the photographed design and the actual vehicle configuration. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Procurement Checklist

• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement

A vehicle inspector should inspect upper edge alignment below the lamps, verify overall corner curvature, and inspect side-retainer engagement before the fitment decision is signed off. This route applies to the rear bumper bracket shown for Daewoo Cielo ’96 / Rarcer ’00 / Nexia ’08.

If images accompany the enquiry, include a fastener detail, a fixing-point close-up, and an underside image. Label the evidence with the vehicle designation Daewoo Cielo ’96 / Rarcer ’00 / Nexia ’08 so the workshop and purchasing team review one configuration.

A vehicle inspector can begin with fastener detail to inspect upper edge alignment below the lamps. A second image should show bracket and bolt-hole spacing from fixing-point close-up. Before the fitment decision is signed off, verify side-retainer engagement and note any difference from the removed component. Keep these observations with the Daewoo Cielo ’96 / Rarcer ’00 / Nexia ’08 vehicle record.

The parts coordinator should capture upper edge alignment below the lamps from a lower-retainer view, then mark side-retainer engagement before the fitment decision is signed off. The service adviser should assess lamp or grille openings from a straight-on view, then align side-retainer engagement before the vehicle is dismantled. The installation team should record overall corner curvature from an installation-opening picture, then trace side-retainer engagement before the purchase order is issued. The importing distributor should note upper edge alignment below the lamps from a straight-on view, then review bracket and bolt-hole spacing before the carton is allocated.

Configuration Check

Protect painted and finished surfaces during handling, and verify panel gaps before tightening fasteners. Recorded packing is 67 × 36 × 32CM / 40PCS; reconfirm current packing when freight is quoted.

Vehicle Confirmation

For a trade enquiry, include required units, delivery location and photographs of the original component. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Frequently Asked Questions

What model is associated with this replacement part?

This page associates the rear bumper bracket with Daewoo Cielo ’96 / Rarcer ’00 / Nexia ’08. The vehicle record and original component should agree with the pictured version.

How should fitment be checked before ordering?

Ask the workshop to inspect upper edge alignment below the lamps together with bracket and bolt-hole spacing. VIN or chassis information can clarify market-specific differences.

How should a wholesale request be submitted?

For a trade enquiry, include required units, delivery location and photographs of the original component. State the required side or installation position where that detail applies.