96169762 Front Bumper for Daewoo Cielo ’96 / Rarcer ’00 / Nexia ’08

Front Bumper for Daewoo Cielo ’96 / Rarcer ’00 / Nexia ’08: A reliable quotation starts with a clear component description and physical comparison evidence. The component belongs to the bumper inspection group.

Product Specifications

Part Recognition Guide

This front bumper is associated with Daewoo Cielo ’96 / Rarcer ’00 / Nexia ’08. Write 96169762 on the inspection sheet and ask the workshop to confirm the same characters on the removed piece. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Physical Fitment Points

• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement

The installation team should trace upper edge alignment below the lamps, mark overall corner curvature, and capture side-retainer engagement before the packing plan is prepared. This route applies to the front bumper shown for Daewoo Cielo ’96 / Rarcer ’00 / Nexia ’08.

If images accompany the enquiry, include a connector close-up, a straight-on view, and a side-profile photograph. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The installation team can begin with connector close-up to trace upper edge alignment below the lamps. A second image should show bracket and bolt-hole spacing from straight-on view. Before the packing plan is prepared, mark side-retainer engagement and note any difference from the removed component. Keep these observations with the Daewoo Cielo ’96 / Rarcer ’00 / Nexia ’08 vehicle record.

A vehicle inspector should record upper edge alignment below the lamps from an adjacent-panel image, then evaluate bracket and bolt-hole spacing before the quotation is approved. The installation team should note upper edge alignment below the lamps from a side-profile photograph, then trace overall corner curvature before the purchase order is issued. The importing distributor should evaluate overall corner curvature from a full component outline, then confirm bracket and bolt-hole spacing before the shipment is booked. A workshop estimator should review side-retainer engagement from a connector close-up, then compare bracket and bolt-hole spacing before the commercial request is submitted.

Replacement Selection Guide

For electrical items, disconnect power according to workshop practice and compare plug orientation first. Recorded packing is 170 × 30 × 67CM / 3PCS; reconfirm current packing when freight is quoted.

Reference Check

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Frequently Asked Questions

What vehicle information should be checked first?

This page associates the front bumper with Daewoo Cielo ’96 / Rarcer ’00 / Nexia ’08. The vehicle record and original component should agree with the pictured version.

What should a workshop inspect before purchase?

Fitment evidence should show upper edge alignment below the lamps, bracket and bolt-hole spacing and the position where the component will be installed.

How should a wholesale request be submitted?

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. State the required side or installation position where that detail applies.