Tail Light Assembly – Rounded Triangular Pair for Daewoo Aveo ’04 / Aveo ’05

Tail Light Assembly – Rounded Triangular Pair for Daewoo Aveo ’04 / Aveo ’05: A reliable quotation starts with a clear component description and physical comparison evidence. The component belongs to the lighting inspection group.

Product Specifications

Configuration Check

This tail light assembly – rounded triangular pair is associated with Daewoo Aveo ’04 / Aveo ’05. Because no OEM reference is available, provide VIN or chassis details and an image of the removed component. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Purchase Preparation

• Electrical plug and pin layout
• Mounting tabs around the housing
• Left or right installation position
• Clearance beside bumper and grille
• Lens profile and outer edge

A vehicle inspector should record electrical plug and pin layout, cross-check mounting tabs around the housing, and evaluate lens profile and outer edge before the purchase order is issued. This route applies to the tail light assembly – rounded triangular pair shown for Daewoo Aveo ’04 / Aveo ’05.

If images accompany the enquiry, include a straight-on view, an underside image, and a full component outline. Label the evidence with the vehicle designation Daewoo Aveo ’04 / Aveo ’05 so the workshop and purchasing team review one configuration.

A vehicle inspector can begin with straight-on view to record electrical plug and pin layout. A second image should show left or right installation position from underside image. Before the purchase order is issued, cross-check lens profile and outer edge and note any difference from the removed component. Keep these observations with the Daewoo Aveo ’04 / Aveo ’05 vehicle record.

A vehicle inspector should measure left or right installation position from an installation-opening picture, then review left or right installation position before the vehicle is dismantled. The procurement contact should review left or right installation position from an original-label photograph, then verify electrical plug and pin layout before the commercial request is submitted. The service adviser should inspect lens profile and outer edge from a fastener detail, then measure lens profile and outer edge before the fitment decision is signed off. The installation team should photograph lens profile and outer edge from a rear mounting view, then review lens profile and outer edge before the packing plan is prepared.

Identification Summary

Complete any functional test appropriate to the component before closing trim or returning the vehicle. No packing entry is published here; request current carton and quantity information with the quotation.

Reference Check

Send the order volume and destination together with VIN or chassis information where available. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Common Workshop Questions

How should the model application be interpreted?

This tail light assembly – rounded triangular pair appears under Daewoo Aveo ’04 / Aveo ’05. Review the exact vehicle version rather than relying on the model name by itself.

How is the pictured version best verified?

Check electrical plug and pin layout, confirm left or right installation position, and retain the removed part until the replacement has been compared side by side.

What should be included in a B2B enquiry?

Send the order volume and destination together with VIN or chassis information where available. This information helps separate technical confirmation from the later shipping calculation.