96542995 Front Bumper Frame for Daewoo Aveo ’04 / Aveo ’05

Front Bumper Frame for Daewoo Aveo ’04 / Aveo ’05: This page brings the main vehicle, component and comparison details into one sourcing reference. The component belongs to the bumper inspection group.

Product Specifications

Replacement Selection Guide

This front bumper frame is associated with Daewoo Aveo ’04 / Aveo ’05. Compare 96542995 character by character with the marking on the removed component. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Technical Comparison Notes

• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement

The stock controller should note upper edge alignment below the lamps, review overall corner curvature, and confirm side-retainer engagement before the packing plan is prepared. This route applies to the front bumper frame shown for Daewoo Aveo ’04 / Aveo ’05.

If images accompany the enquiry, include a straight-on view, a fixing-point close-up, and a vehicle-side photograph. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The stock controller can begin with straight-on view to note upper edge alignment below the lamps. A second image should show bracket and bolt-hole spacing from fixing-point close-up. Before the packing plan is prepared, review side-retainer engagement and note any difference from the removed component. Keep these observations with the Daewoo Aveo ’04 / Aveo ’05 vehicle record.

A collision-repair specialist should verify overall corner curvature from a vehicle-side photograph, then document overall corner curvature before the vehicle is dismantled. The service adviser should confirm lamp or grille openings from a full component outline, then photograph upper edge alignment below the lamps before the purchase order is issued. The receiving technician should photograph side-retainer engagement from a connector close-up, then photograph bracket and bolt-hole spacing before the stock request is released. A body-shop buyer should review lamp or grille openings from an installation-opening picture, then verify overall corner curvature before the delivery plan is confirmed.

Vehicle-Side Evidence

Inspect clips and retainers because worn hardware can affect alignment even when the main part is correct. Recorded packing is 150 × 35 × 16CM / 3PCS; reconfirm current packing when freight is quoted.

Vehicle Confirmation

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Ordering FAQ

What model is associated with this replacement part?

The associated model designation is Daewoo Aveo ’04 / Aveo ’05. Confirm the body or electrical configuration relevant to this front bumper frame.

What should be compared with the removed component?

Check upper edge alignment below the lamps, confirm bracket and bolt-hole spacing, and retain the removed part until the replacement has been compared side by side.

What should be included in a B2B enquiry?

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Keep each requested product on a separate line when several parts share one shipment.