Fog Light Old for Daewoo Aveo ’11 / Sonic ’17 / Espero

Fog Light Old for Daewoo Aveo ’11 / Sonic ’17 / Espero: This component should be selected through a combined check of reference data and visible geometry. The component belongs to the lighting inspection group.

Product Specifications

Pre-Order Inspection

This fog light old is associated with Daewoo Aveo ’11 / Sonic ’17 / Espero. Use a side-by-side shape comparison in place of an invented reference number. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Workshop Comparison

• Mounting tabs around the housing
• Left or right installation position
• Clearance beside bumper and grille
• Lens profile and outer edge
• Electrical plug and pin layout

The repair planner should evaluate mounting tabs around the housing, note left or right installation position, and review electrical plug and pin layout before the installation begins. This route applies to the fog light old shown for Daewoo Aveo ’11 / Sonic ’17 / Espero.

If images accompany the enquiry, include an upper-edge image, a fastener detail, and a side-profile photograph. Label the evidence with the vehicle designation Daewoo Aveo ’11 / Sonic ’17 / Espero so the workshop and purchasing team review one configuration.

The repair planner can begin with upper-edge image to evaluate mounting tabs around the housing. A second image should show clearance beside bumper and grille from fastener detail. Before the installation begins, note electrical plug and pin layout and note any difference from the removed component. Keep these observations with the Daewoo Aveo ’11 / Sonic ’17 / Espero vehicle record.

The service adviser should trace mounting tabs around the housing from a rear mounting view, then verify clearance beside bumper and grille before the stock request is released. The maintenance supervisor should trace lens profile and outer edge from a lower-retainer view, then evaluate mounting tabs around the housing before the purchase order is issued. A collision-repair specialist should trace electrical plug and pin layout from a fastener detail, then verify electrical plug and pin layout before the quotation is approved. A workshop estimator should cross-check lens profile and outer edge from a fastener detail, then trace lens profile and outer edge before the installation begins.

Buyer Verification Notes

Photograph the original arrangement before removal when several brackets or connectors are involved. Recorded packing is 77 × 45 × 48.5CM / 30PCS; reconfirm current packing when freight is quoted.

Physical Fitment Points

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Buyer Questions

Which Hyundai model does this page cover?

This fog light old is listed for Daewoo Aveo ’11 / Sonic ’17 / Espero. Use that designation as a starting point and verify the vehicle configuration before ordering.

What should be compared with the removed component?

Ask the workshop to inspect mounting tabs around the housing together with clearance beside bumper and grille. VIN or chassis information can clarify market-specific differences.

What should a distributor send for a quotation?

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Providing the vehicle record at the start reduces follow-up questions during quotation.