94536814 / 94536815 Front Bumper Bracket for Daewoo Spark ’18 Beat

Front Bumper Bracket for Daewoo Spark ’18 Beat: The following information supports a structured pre-order check for trade buyers. The component belongs to the bumper inspection group.

Product Specifications

Application Review

This front bumper bracket is associated with Daewoo Spark ’18 Beat. If 94536814 / 94536815 appears on the original label or casting, continue by confirming holes, clips and clearance. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Ordering Information

• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing

A vehicle inspector should document lamp or grille openings, measure side-retainer engagement, and measure bracket and bolt-hole spacing before the replacement is test-positioned. This route applies to the front bumper bracket shown for Daewoo Spark ’18 Beat.

If images accompany the enquiry, include a lower-retainer view, a rear mounting view, and an installation-opening picture. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

A vehicle inspector can begin with lower-retainer view to document lamp or grille openings. A second image should show upper edge alignment below the lamps from rear mounting view. Before the replacement is test-positioned, measure bracket and bolt-hole spacing and note any difference from the removed component. Keep these observations with the Daewoo Spark ’18 Beat vehicle record.

A collision-repair specialist should evaluate upper edge alignment below the lamps from a chassis-plate image, then evaluate bracket and bolt-hole spacing before the fitment decision is signed off. The procurement contact should inspect upper edge alignment below the lamps from a connector close-up, then review side-retainer engagement before the installation begins. The procurement contact should note overall corner curvature from a connector close-up, then note overall corner curvature before the delivery plan is confirmed. The maintenance supervisor should record overall corner curvature from a straight-on view, then document overall corner curvature before the stock request is released.

Fitment Evidence

Retain the removed part until the replacement has been visually compared and test-positioned. No packing entry is published here; request current carton and quantity information with the quotation.

Buyer Verification Notes

Send the order volume and destination together with VIN or chassis information where available. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Purchase Questions

Which vehicle is this component listed for?

This front bumper bracket is listed for Daewoo Spark ’18 Beat. Use that designation as a starting point and verify the vehicle configuration before ordering.

Which details help confirm the correct version?

Compare lamp or grille openings, upper edge alignment below the lamps and the required installation position with the removed component. VIN or chassis details add another useful check.

How can a trade buyer request pricing?

Send the order volume and destination together with VIN or chassis information where available. Keep each requested product on a separate line when several parts share one shipment.