Tail Light Assembly Pair for Daewoo Matiz-Iv ’09

Tail Light Assembly Pair for Daewoo Matiz-Iv ’09: This component should be selected through a combined check of reference data and visible geometry. The component belongs to the lighting inspection group.

Product Specifications

Commercial Request Details

This tail light assembly pair is associated with Daewoo Matiz-Iv ’09. Use a side-by-side shape comparison in place of an invented reference number. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Installation Planning

• Electrical plug and pin layout
• Mounting tabs around the housing
• Left or right installation position
• Clearance beside bumper and grille
• Lens profile and outer edge

The parts coordinator should verify electrical plug and pin layout, measure mounting tabs around the housing, and cross-check lens profile and outer edge before the installation begins. This route applies to the tail light assembly pair shown for Daewoo Matiz-Iv ’09.

If images accompany the enquiry, include a vehicle-side photograph, a chassis-plate image, and a rear mounting view. Label the evidence with the vehicle designation Daewoo Matiz-Iv ’09 so the workshop and purchasing team review one configuration.

The parts coordinator can begin with vehicle-side photograph to verify electrical plug and pin layout. A second image should show left or right installation position from chassis-plate image. Before the installation begins, measure lens profile and outer edge and note any difference from the removed component. Keep these observations with the Daewoo Matiz-Iv ’09 vehicle record.

The installation team should document left or right installation position from a straight-on view, then compare electrical plug and pin layout before the packing plan is prepared. A workshop estimator should mark electrical plug and pin layout from a lower-retainer view, then confirm clearance beside bumper and grille before the carton is allocated. A workshop estimator should measure left or right installation position from a removed-part overview, then verify electrical plug and pin layout before the fitment decision is signed off. The procurement contact should inspect left or right installation position from a fastener detail, then document left or right installation position before the packing plan is prepared.

Component Matching Record

For electrical items, disconnect power according to workshop practice and compare plug orientation first. No packing entry is published here; request current carton and quantity information with the quotation.

Workshop Comparison

Include packaging questions, requested quantity and the receiving country in the initial enquiry. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Fitment FAQ

What model is associated with this replacement part?

The associated model designation is Daewoo Matiz-Iv ’09. Confirm the body or electrical configuration relevant to this tail light assembly pair.

What should be compared with the removed component?

Review electrical plug and pin layout first, then inspect left or right installation position on the vehicle. Clear photographs help the supplier assess the required version.

How should a wholesale request be submitted?

Include packaging questions, requested quantity and the receiving country in the initial enquiry. Add vehicle details so availability and packing can be checked against the requested version.