86560-J9000 Front Bumper Grille for Hyundai Kona / Kona 2021

Front Bumper Grille for Hyundai Kona / Kona 2021: Parts selection should begin with the removed component and the exact vehicle record. The component belongs to the bumper inspection group.

Product Specifications

Installation Planning

This front bumper grille is associated with Hyundai Kona / Kona 2021. Retain the complete sequence 86560-J9000 when sending a confirmation request. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Reference Check

• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing

The maintenance supervisor should align lamp or grille openings, document side-retainer engagement, and trace bracket and bolt-hole spacing before the stock request is released. This route applies to the front bumper grille shown for Hyundai Kona / Kona 2021.

If images accompany the enquiry, include a lower-retainer view, an upper-edge image, and a rear mounting view. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The maintenance supervisor can begin with lower-retainer view to align lamp or grille openings. A second image should show upper edge alignment below the lamps from upper-edge image. Before the stock request is released, document bracket and bolt-hole spacing and note any difference from the removed component. Keep these observations with the Hyundai Kona / Kona 2021 vehicle record.

The stock controller should inspect lamp or grille openings from an adjacent-panel image, then photograph overall corner curvature before the delivery plan is confirmed. A body-shop buyer should verify upper edge alignment below the lamps from an adjacent-panel image, then trace overall corner curvature before the delivery plan is confirmed. The parts coordinator should mark overall corner curvature from an upper-edge image, then record upper edge alignment below the lamps before the vehicle is dismantled. The parts coordinator should note bracket and bolt-hole spacing from a straight-on view, then align upper edge alignment below the lamps before the carton is allocated.

Physical Fitment Points

Installation should follow the vehicle repair manual and use serviceable original-style fasteners. Recorded packing is 120 × 24 × 17CM / 5PCS; reconfirm current packing when freight is quoted.

Repair Planning Notes

For a trade enquiry, include required units, delivery location and photographs of the original component. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Buyer Questions

Which Hyundai model does this page cover?

The stated vehicle is Hyundai Kona / Kona 2021. Treat that model label as one part of the fitment check, together with photographs and chassis details.

What should be compared with the removed component?

Ask the workshop to inspect lamp or grille openings together with upper edge alignment below the lamps. VIN or chassis information can clarify market-specific differences.

What should be included in a B2B enquiry?

For a trade enquiry, include required units, delivery location and photographs of the original component. State the required side or installation position where that detail applies.