86610-J9000 Rear Bumper for Hyundai Kona / Kona 2021

Rear Bumper for Hyundai Kona / Kona 2021: This page brings the main vehicle, component and comparison details into one sourcing reference. The component belongs to the bumper inspection group.

Product Specifications

Commercial Request Details

This rear bumper is associated with Hyundai Kona / Kona 2021. Write 86610-J9000 on the inspection sheet and ask the workshop to confirm the same characters on the removed piece. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Supply Enquiry Details

• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing

A vehicle inspector should note lamp or grille openings, capture side-retainer engagement, and cross-check bracket and bolt-hole spacing before the installation begins. This route applies to the rear bumper shown for Hyundai Kona / Kona 2021.

If images accompany the enquiry, include a fixing-point close-up, an installation-opening picture, and a rear mounting view. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

A vehicle inspector can begin with fixing-point close-up to note lamp or grille openings. A second image should show upper edge alignment below the lamps from installation-opening picture. Before the installation begins, capture bracket and bolt-hole spacing and note any difference from the removed component. Keep these observations with the Hyundai Kona / Kona 2021 vehicle record.

The procurement contact should confirm lamp or grille openings from an upper-edge image, then measure lamp or grille openings before the delivery plan is confirmed. A collision-repair specialist should confirm bracket and bolt-hole spacing from a fixing-point close-up, then mark overall corner curvature before the delivery plan is confirmed. A body-shop buyer should verify bracket and bolt-hole spacing from a corner-profile view, then note bracket and bolt-hole spacing before the stock request is released. A workshop estimator should evaluate side-retainer engagement from a corner-profile view, then capture side-retainer engagement before the stock request is released.

Physical Fitment Points

Inspect clips and retainers because worn hardware can affect alignment even when the main part is correct. No packing entry is published here; request current carton and quantity information with the quotation.

Technical Comparison Notes

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Purchase Questions

What is the listed vehicle application?

This rear bumper is listed for Hyundai Kona / Kona 2021. Use that designation as a starting point and verify the vehicle configuration before ordering.

What should be compared with the removed component?

Compare lamp or grille openings, upper edge alignment below the lamps and the required installation position with the removed component. VIN or chassis details add another useful check.

Which details help prepare shipping terms?

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. This information helps separate technical confirmation from the later shipping calculation.