86811-A0000 / 86812-A0000 Inner Fender for Hyundai I30 ’12 / Ix25 / Creta

Inner Fender for Hyundai I30 ’12 / Ix25 / Creta: Match the item to the vehicle configuration before quantity and shipping terms are confirmed. The component belongs to the body inspection group.

Product Specifications

Technical Comparison Notes

This inner fender is associated with Hyundai I30 ’12 / Ix25 / Creta. For purchasing documents, quote 86811-A0000 / 86812-A0000 exactly and add the destination market and vehicle information. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Commercial Request Details

• Bolt and clip locations
• Wheel-arch or lamp clearance
• Opening and hole pattern
• Left or right orientation
• Panel contour

The stock controller should evaluate bolt and clip locations, verify wheel-arch or lamp clearance, and record panel contour before the commercial request is submitted. This route applies to the inner fender shown for Hyundai I30 ’12 / Ix25 / Creta.

If images accompany the enquiry, include an underside image, a fixing-point close-up, and a straight-on view. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The stock controller can begin with underside image to evaluate bolt and clip locations. A second image should show opening and hole pattern from fixing-point close-up. Before the commercial request is submitted, verify panel contour and note any difference from the removed component. Keep these observations with the Hyundai I30 ’12 / Ix25 / Creta vehicle record.

The installation team should verify panel contour from a vehicle-side photograph, then capture left or right orientation before the fitment decision is signed off. The procurement contact should evaluate bolt and clip locations from a rear mounting view, then mark bolt and clip locations before the installation begins. The repair planner should inspect wheel-arch or lamp clearance from an installation-opening picture, then evaluate bolt and clip locations before the shipment is booked. The repair planner should evaluate bolt and clip locations from a side-profile photograph, then document left or right orientation before the commercial request is submitted.

Workshop Comparison

Trial-position the component with nearby trim loosened only as required by workshop procedure. No packing entry is published here; request current carton and quantity information with the quotation.

Application Review

Include packaging questions, requested quantity and the receiving country in the initial enquiry. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Product Questions and Answers

What is the listed vehicle application?

This inner fender appears under Hyundai I30 ’12 / Ix25 / Creta. Review the exact vehicle version rather than relying on the model name by itself.

How can an incorrect order be avoided?

Use the old component to check bolt and clip locations and opening and hole pattern. Also state the installation side or position in the enquiry.

What should a distributor send for a quotation?

Include packaging questions, requested quantity and the receiving country in the initial enquiry. Add vehicle details so availability and packing can be checked against the requested version.