64101-A5000 Panel for Hyundai I30 ’12 / Ix25 / Creta

Panel for Hyundai I30 ’12 / Ix25 / Creta: Review the identification points below before adding this component to a repair estimate. The component belongs to the body inspection group.

Product Specifications

Buyer Verification Notes

This panel is associated with Hyundai I30 ’12 / Ix25 / Creta. The references 64101-A5000 support identification but do not replace a physical comparison. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Reference Check

• Wheel-arch or lamp clearance
• Opening and hole pattern
• Left or right orientation
• Panel contour
• Bolt and clip locations

The parts coordinator should cross-check wheel-arch or lamp clearance, inspect opening and hole pattern, and record bolt and clip locations before the delivery plan is confirmed. This route applies to the panel shown for Hyundai I30 ’12 / Ix25 / Creta.

If images accompany the enquiry, include a fixing-point close-up, a corner-profile view, and a lower-retainer view. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The parts coordinator can begin with fixing-point close-up to cross-check wheel-arch or lamp clearance. A second image should show left or right orientation from corner-profile view. Before the delivery plan is confirmed, inspect bolt and clip locations and note any difference from the removed component. Keep these observations with the Hyundai I30 ’12 / Ix25 / Creta vehicle record.

The service adviser should assess left or right orientation from a lower-retainer view, then photograph bolt and clip locations before the installation begins. A workshop estimator should note wheel-arch or lamp clearance from a removed-part overview, then review panel contour before the packing plan is prepared. A workshop estimator should measure bolt and clip locations from a rear mounting view, then measure wheel-arch or lamp clearance before the fitment decision is signed off. A body-shop buyer should note panel contour from an installation-opening picture, then verify left or right orientation before the commercial request is submitted.

Procurement Checklist

Complete any functional test appropriate to the component before closing trim or returning the vehicle. No packing entry is published here; request current carton and quantity information with the quotation.

Vehicle-Side Evidence

A complete sourcing request names the quantity, delivery market and the comparison information used. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Buyer Questions

Which vehicle record belongs with this product?

The listing covers Hyundai I30 ’12 / Ix25 / Creta. Because configurations may vary, check the actual installation area before approving the panel.

How should fitment be checked before ordering?

Compare wheel-arch or lamp clearance, left or right orientation and the required installation position with the removed component. VIN or chassis details add another useful check.

What should be included in a B2B enquiry?

A complete sourcing request names the quantity, delivery market and the comparison information used. Packing and freight can be discussed after the component version has been identified.