86530-2L000 Front Bumper Support for Hyundai I30 ’09 / I30 ’12

Front Bumper Support for Hyundai I30 ’09 / I30 ’12: The following information supports a structured pre-order check for trade buyers. The component belongs to the bumper inspection group.

Product Specifications

Workshop Comparison

This front bumper support is associated with Hyundai I30 ’09 / I30 ’12. Retain the complete sequence 86530-2L000 when sending a confirmation request. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Vehicle-Side Evidence

• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature

The parts coordinator should compare bracket and bolt-hole spacing, trace lamp or grille openings, and inspect overall corner curvature before the vehicle is dismantled. This route applies to the front bumper support shown for Hyundai I30 ’09 / I30 ’12.

If images accompany the enquiry, include a vehicle-side photograph, a side-profile photograph, and a chassis-plate image. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The parts coordinator can begin with vehicle-side photograph to compare bracket and bolt-hole spacing. A second image should show side-retainer engagement from side-profile photograph. Before the vehicle is dismantled, trace overall corner curvature and note any difference from the removed component. Keep these observations with the Hyundai I30 ’09 / I30 ’12 vehicle record.

The repair planner should verify side-retainer engagement from an underside image, then verify bracket and bolt-hole spacing before the carton is allocated. A workshop estimator should capture upper edge alignment below the lamps from a lower-retainer view, then assess side-retainer engagement before the commercial request is submitted. The stock controller should record upper edge alignment below the lamps from a fastener detail, then document side-retainer engagement before the carton is allocated. The importing distributor should photograph lamp or grille openings from an underside image, then document upper edge alignment below the lamps before the commercial request is submitted.

Physical Fitment Points

Protect painted and finished surfaces during handling, and verify panel gaps before tightening fasteners. No packing entry is published here; request current carton and quantity information with the quotation.

Reference Check

Distributors may request pricing by stating volume, destination and the vehicle identification data held. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Purchase Questions

How should the model application be interpreted?

This page associates the front bumper support with Hyundai I30 ’09 / I30 ’12. The vehicle record and original component should agree with the pictured version.

How can an incorrect order be avoided?

Fitment evidence should show bracket and bolt-hole spacing, side-retainer engagement and the position where the component will be installed.

What should a distributor send for a quotation?

Distributors may request pricing by stating volume, destination and the vehicle identification data held. Keep each requested product on a separate line when several parts share one shipment.