92201-2S000 / 92202-2S000 Fog Light for Hyundai Tucson ’21 / Ix35 ’10-’12

Fog Light for Hyundai Tucson ’21 / Ix35 ’10-’12: This page brings the main vehicle, component and comparison details into one sourcing reference. The component belongs to the lighting inspection group.

Product Specifications

Installation Planning

This fog light is associated with Hyundai Tucson ’21 / Ix35 ’10-’12. A search enquiry may include 92201-2S000 / 92202-2S000; the order should also state the vehicle and required side. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Identification Summary

• Mounting tabs around the housing
• Left or right installation position
• Clearance beside bumper and grille
• Lens profile and outer edge
• Electrical plug and pin layout

The installation team should review mounting tabs around the housing, cross-check left or right installation position, and document electrical plug and pin layout before the carton is allocated. This route applies to the fog light shown for Hyundai Tucson ’21 / Ix35 ’10-’12.

If images accompany the enquiry, include an installation-opening picture, a full component outline, and a fixing-point close-up. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The installation team can begin with installation-opening picture to review mounting tabs around the housing. A second image should show clearance beside bumper and grille from full component outline. Before the carton is allocated, cross-check electrical plug and pin layout and note any difference from the removed component. Keep these observations with the Hyundai Tucson ’21 / Ix35 ’10-’12 vehicle record.

A body-shop buyer should verify electrical plug and pin layout from an upper-edge image, then inspect left or right installation position before the vehicle is dismantled. A vehicle inspector should capture mounting tabs around the housing from a rear mounting view, then cross-check left or right installation position before the commercial request is submitted. The installation team should note lens profile and outer edge from an underside image, then verify mounting tabs around the housing before the quotation is approved. The receiving technician should cross-check clearance beside bumper and grille from a fixing-point close-up, then document electrical plug and pin layout before the carton is allocated.

Part Recognition Guide

Photograph the original arrangement before removal when several brackets or connectors are involved. Recorded packing is 69 × 44 × 40CM / 20PCS; reconfirm current packing when freight is quoted.

Pre-Order Inspection

Send the order volume and destination together with VIN or chassis information where available. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Purchase Questions

What is the listed vehicle application?

Application information points to Hyundai Tucson ’21 / Ix35 ’10-’12. A workshop should still compare the removed item and mounting location before ordering.

What should be compared with the removed component?

Compare mounting tabs around the housing, clearance beside bumper and grille and the required installation position with the removed component. VIN or chassis details add another useful check.

What should a distributor send for a quotation?

Send the order volume and destination together with VIN or chassis information where available. Include clear original-part photographs when the exact configuration needs further review.