92303-2E000 / 92304-2E000 Side Marker Light for Hyundai Starex ’18 / H1 / Tucson

Side Marker Light for Hyundai Starex ’18 / H1 / Tucson: This product entry is arranged for workshops and distributors checking a replacement requirement. The component belongs to the lighting inspection group.

Product Specifications

Vehicle-Side Evidence

This side marker light is associated with Hyundai Starex ’18 / H1 / Tucson. For purchasing documents, quote 92303-2E000 / 92304-2E000 exactly and add the destination market and vehicle information. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Part Recognition Guide

• Clearance beside bumper and grille
• Lens profile and outer edge
• Electrical plug and pin layout
• Mounting tabs around the housing
• Left or right installation position

The installation team should record clearance beside bumper and grille, evaluate lens profile and outer edge, and document left or right installation position before the purchase order is issued. This route applies to the side marker light shown for Hyundai Starex ’18 / H1 / Tucson.

If images accompany the enquiry, include an adjacent-panel image, a fixing-point close-up, and a side-profile photograph. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The installation team can begin with adjacent-panel image to record clearance beside bumper and grille. A second image should show electrical plug and pin layout from fixing-point close-up. Before the purchase order is issued, evaluate left or right installation position and note any difference from the removed component. Keep these observations with the Hyundai Starex ’18 / H1 / Tucson vehicle record.

A vehicle inspector should align clearance beside bumper and grille from a chassis-plate image, then verify lens profile and outer edge before the delivery plan is confirmed. The importing distributor should review electrical plug and pin layout from an original-label photograph, then cross-check electrical plug and pin layout before the fitment decision is signed off. The procurement contact should confirm left or right installation position from a fastener detail, then confirm mounting tabs around the housing before the packing plan is prepared. The stock controller should document clearance beside bumper and grille from a fixing-point close-up, then inspect lens profile and outer edge before the repair schedule is finalized.

Physical Fitment Points

A qualified installer should resolve alignment or wiring differences before the vehicle returns to service. No packing entry is published here; request current carton and quantity information with the quotation.

Commercial Request Details

Distributors may request pricing by stating volume, destination and the vehicle identification data held. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Ordering FAQ

Which vehicle record belongs with this product?

This side marker light appears under Hyundai Starex ’18 / H1 / Tucson. Review the exact vehicle version rather than relying on the model name by itself.

What should be compared with the removed component?

Fitment evidence should show clearance beside bumper and grille, electrical plug and pin layout and the position where the component will be installed.

How should a wholesale request be submitted?

Distributors may request pricing by stating volume, destination and the vehicle identification data held. Add vehicle details so availability and packing can be checked against the requested version.