92303-4H000 / 92304-4H000 Sdie Lamp for Hyundai Starex ’18 / H1 / Tucson
- Quotation input: quantity plus destination
- Evaluate clearance beside bumper and grille at the installation area
- Examine left or right installation position
- Identify lens profile and outer edge against the removed part
- Retain the removed sdie lamp for workshop comparison
- Compare the vehicle record before purchasing
- Workshop route: the stock controller should photograph mounting tabs around the housing before the repair schedule is finalized
Sdie Lamp for Hyundai Starex ’18 / H1 / Tucson: Review the identification points below before adding this component to a repair estimate. The component belongs to the lighting inspection group.
Product Specifications
| Product name | Sdie Lamp |
|---|---|
| OEM replacement references | 92303-4H000 / 92304-4H000 |
| Vehicle model | Hyundai Starex ’18 / H1 / Tucson |
| Component area | Lighting |
| Primary comparison | mounting tabs around the housing |
| Secondary comparison | clearance beside bumper and grille |
| Fitment confirmation | the stock controller should photograph lens profile and outer edge before the repair schedule is finalized |
Vehicle-Side Evidence
This sdie lamp is associated with Hyundai Starex ’18 / H1 / Tucson. The numbers 92303-4H000 / 92304-4H000 are most useful when supported by VIN or chassis data and clear photographs. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.
Buyer Verification Notes
- Mounting tabs around the housing
- Left or right installation position
- Clearance beside bumper and grille
- Lens profile and outer edge
- Electrical plug and pin layout
The stock controller should photograph mounting tabs around the housing, verify left or right installation position, and confirm electrical plug and pin layout before the repair schedule is finalized. This route applies to the sdie lamp shown for Hyundai Starex ’18 / H1 / Tucson.
If images accompany the enquiry, include an adjacent-panel image, a lower-retainer view, and an original-label photograph. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.
The stock controller can begin with adjacent-panel image to photograph mounting tabs around the housing. A second image should show clearance beside bumper and grille from lower-retainer view. Before the repair schedule is finalized, verify electrical plug and pin layout and note any difference from the removed component. Keep these observations with the Hyundai Starex ’18 / H1 / Tucson vehicle record.
The importing distributor should record lens profile and outer edge from a fixing-point close-up, then evaluate clearance beside bumper and grille before the vehicle is dismantled. The receiving technician should cross-check electrical plug and pin layout from an upper-edge image, then cross-check electrical plug and pin layout before the stock request is released. The parts coordinator should align electrical plug and pin layout from a straight-on view, then confirm lens profile and outer edge before the replacement is test-positioned. A body-shop buyer should assess lens profile and outer edge from a connector close-up, then align electrical plug and pin layout before the carton is allocated.
Supply Enquiry Details
A qualified installer should resolve alignment or wiring differences before the vehicle returns to service. No packing entry is published here; request current carton and quantity information with the quotation.
Installation Planning
A complete sourcing request names the quantity, delivery market and the comparison information used. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.
Purchase Questions
How should the model application be interpreted?
The associated model designation is Hyundai Starex ’18 / H1 / Tucson. Confirm the body or electrical configuration relevant to this sdie lamp.
What should a workshop inspect before purchase?
Use the old component to check mounting tabs around the housing and clearance beside bumper and grille. Also state the installation side or position in the enquiry.
What information is needed for a quotation?
A complete sourcing request names the quantity, delivery market and the comparison information used. The supplier can then review the product version, carton requirements and delivery options.
| Size | UK | US | EU | Japan |
| XS | 6 - 8 | 4 | 34 | 7 |
| S | 8 -10 | 6 | 36 | 9 |
| M | 10 - 12 | 8 | 38 | 11 |
| L | 12 - 14 | 10 | 40 | 13 |
| XL | 14 - 16 | 12 | 42 | 15 |
| XXL | 16 - 28 | 14 | 44 | 17 |
