64900-L1000 Front Bumper Support for Hyundai Sonata ’21 / Santa Fe ’00-’06

Front Bumper Support for Hyundai Sonata ’21 / Santa Fe ’00-’06: Use the model label as a starting point, then verify the actual mounting layout on the vehicle. The component belongs to the bumper inspection group.

Product Specifications

Identification Summary

This front bumper support is associated with Hyundai Sonata ’21 / Santa Fe ’00-’06. The OEM entry 64900-L1000 supplies a searchable identifier and should agree with the original marking. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Inspection Route

• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature

The stock controller should document bracket and bolt-hole spacing, measure lamp or grille openings, and note overall corner curvature before the repair schedule is finalized. This route applies to the front bumper support shown for Hyundai Sonata ’21 / Santa Fe ’00-’06.

If images accompany the enquiry, include an adjacent-panel image, an adjacent-panel image, and a rear mounting view. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The stock controller can begin with adjacent-panel image to document bracket and bolt-hole spacing. A second image should show side-retainer engagement from adjacent-panel image. Before the repair schedule is finalized, measure overall corner curvature and note any difference from the removed component. Keep these observations with the Hyundai Sonata ’21 / Santa Fe ’00-’06 vehicle record.

The procurement contact should evaluate bracket and bolt-hole spacing from a rear mounting view, then assess upper edge alignment below the lamps before the installation begins. The receiving technician should confirm bracket and bolt-hole spacing from a side-profile photograph, then align bracket and bolt-hole spacing before the quotation is approved. The installation team should cross-check overall corner curvature from a fastener detail, then measure overall corner curvature before the purchase order is issued. A workshop estimator should align bracket and bolt-hole spacing from a straight-on view, then record bracket and bolt-hole spacing before the fitment decision is signed off.

Pre-Order Inspection

Transfer reusable hardware only after checking that every retainer matches the replacement openings. No packing entry is published here; request current carton and quantity information with the quotation.

Configuration Check

Include packaging questions, requested quantity and the receiving country in the initial enquiry. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Buyer Questions

What model is associated with this replacement part?

The associated model designation is Hyundai Sonata ’21 / Santa Fe ’00-’06. Confirm the body or electrical configuration relevant to this front bumper support.

What should a workshop inspect before purchase?

Review bracket and bolt-hole spacing first, then inspect side-retainer engagement on the vehicle. Clear photographs help the supplier assess the required version.

What should a distributor send for a quotation?

Include packaging questions, requested quantity and the receiving country in the initial enquiry. Include clear original-part photographs when the exact configuration needs further review.