86610-L1010 / 86611-L1000 Rear Bumper for Hyundai Sonata ’21 / Santa Fe ’00-’06

Rear Bumper for Hyundai Sonata ’21 / Santa Fe ’00-’06: This component should be selected through a combined check of reference data and visible geometry. The component belongs to the bumper inspection group.

Product Specifications

Replacement Selection Guide

This rear bumper is associated with Hyundai Sonata ’21 / Santa Fe ’00-’06. An OEM match to 86610-L1010 / 86611-L1000 is one layer of evidence; hole spacing and surrounding parts provide another. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Physical Fitment Points

• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature

The repair planner should inspect bracket and bolt-hole spacing, evaluate lamp or grille openings, and capture overall corner curvature before the stock request is released. This route applies to the rear bumper shown for Hyundai Sonata ’21 / Santa Fe ’00-’06.

If images accompany the enquiry, include a fixing-point close-up, a corner-profile view, and a removed-part overview. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The repair planner can begin with fixing-point close-up to inspect bracket and bolt-hole spacing. A second image should show side-retainer engagement from corner-profile view. Before the stock request is released, evaluate overall corner curvature and note any difference from the removed component. Keep these observations with the Hyundai Sonata ’21 / Santa Fe ’00-’06 vehicle record.

The stock controller should verify bracket and bolt-hole spacing from a corner-profile view, then mark side-retainer engagement before the installation begins. The maintenance supervisor should record upper edge alignment below the lamps from an original-label photograph, then photograph bracket and bolt-hole spacing before the purchase order is issued. A workshop estimator should confirm side-retainer engagement from a fixing-point close-up, then assess bracket and bolt-hole spacing before the purchase order is issued. The service adviser should inspect side-retainer engagement from a fixing-point close-up, then align lamp or grille openings before the fitment decision is signed off.

Application Review

Measure questionable mounting distances before modifying any surrounding component. No packing entry is published here; request current carton and quantity information with the quotation.

Technical Comparison Notes

Send the order volume and destination together with VIN or chassis information where available. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Fitment FAQ

What vehicle information should be checked first?

The recorded application is Hyundai Sonata ’21 / Santa Fe ’00-’06. Confirm trim, market specification and the removed rear bumper before purchase.

How is the pictured version best verified?

Photograph bracket and bolt-hole spacing and the mounting area around side-retainer engagement. Combine those images with vehicle identification data for review.

Which details help prepare shipping terms?

Send the order volume and destination together with VIN or chassis information where available. Packing and freight can be discussed after the component version has been identified.