86530-3S000 Front Bumper Support for Hyundai Sonata ’11-’13

Front Bumper Support for Hyundai Sonata ’11-’13: Use the model label as a starting point, then verify the actual mounting layout on the vehicle. The component belongs to the bumper inspection group.

Product Specifications

Vehicle Confirmation

This front bumper support is associated with Hyundai Sonata ’11-’13. If 86530-3S000 appears on the original label or casting, continue by confirming holes, clips and clearance. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Purchase Preparation

• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing

The installation team should verify lamp or grille openings, confirm side-retainer engagement, and compare bracket and bolt-hole spacing before the purchase order is issued. This route applies to the front bumper support shown for Hyundai Sonata ’11-’13.

If images accompany the enquiry, include a full component outline, a fixing-point close-up, and an original-label photograph. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The installation team can begin with full component outline to verify lamp or grille openings. A second image should show upper edge alignment below the lamps from fixing-point close-up. Before the purchase order is issued, confirm bracket and bolt-hole spacing and note any difference from the removed component. Keep these observations with the Hyundai Sonata ’11-’13 vehicle record.

The maintenance supervisor should document side-retainer engagement from a fastener detail, then evaluate overall corner curvature before the vehicle is dismantled. The service adviser should record lamp or grille openings from an installation-opening picture, then capture lamp or grille openings before the packing plan is prepared. The stock controller should photograph side-retainer engagement from a removed-part overview, then confirm bracket and bolt-hole spacing before the purchase order is issued. The maintenance supervisor should cross-check lamp or grille openings from an upper-edge image, then note upper edge alignment below the lamps before the packing plan is prepared.

Supply Enquiry Details

Protect painted and finished surfaces during handling, and verify panel gaps before tightening fasteners. No packing entry is published here; request current carton and quantity information with the quotation.

Replacement Selection Guide

For a trade enquiry, include required units, delivery location and photographs of the original component. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Fitment FAQ

Which Hyundai model does this page cover?

The listing covers Hyundai Sonata ’11-’13. Because configurations may vary, check the actual installation area before approving the front bumper support.

What evidence is useful for a fitment review?

Review lamp or grille openings first, then inspect upper edge alignment below the lamps on the vehicle. Clear photographs help the supplier assess the required version.

Which details help prepare shipping terms?

For a trade enquiry, include required units, delivery location and photographs of the original component. Packing and freight can be discussed after the component version has been identified.