86510-3K000 Front Bumper-W / O Wisp for Hyundai Sonata ’04 / Sonata ’08

Front Bumper-W / O Wisp for Hyundai Sonata ’04 / Sonata ’08: This page brings the main vehicle, component and comparison details into one sourcing reference. The component belongs to the bumper inspection group.

Product Specifications

Technical Comparison Notes

This front bumper-w / o wisp is associated with Hyundai Sonata ’04 / Sonata ’08. Compare 86510-3K000 character by character with the marking on the removed component. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Commercial Request Details

• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing

The receiving technician should record lamp or grille openings, cross-check side-retainer engagement, and evaluate bracket and bolt-hole spacing before the vehicle is dismantled. This route applies to the front bumper-w / o wisp shown for Hyundai Sonata ’04 / Sonata ’08.

If images accompany the enquiry, include a connector close-up, an upper-edge image, and an adjacent-panel image. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The receiving technician can begin with connector close-up to record lamp or grille openings. A second image should show upper edge alignment below the lamps from upper-edge image. Before the vehicle is dismantled, cross-check bracket and bolt-hole spacing and note any difference from the removed component. Keep these observations with the Hyundai Sonata ’04 / Sonata ’08 vehicle record.

The parts coordinator should trace lamp or grille openings from a lower-retainer view, then capture bracket and bolt-hole spacing before the delivery plan is confirmed. The service adviser should measure bracket and bolt-hole spacing from a straight-on view, then mark lamp or grille openings before the commercial request is submitted. The parts coordinator should confirm upper edge alignment below the lamps from a fixing-point close-up, then record overall corner curvature before the carton is allocated. The maintenance supervisor should cross-check lamp or grille openings from a corner-profile view, then photograph overall corner curvature before the stock request is released.

Fitment Evidence

For electrical items, disconnect power according to workshop practice and compare plug orientation first. Recorded packing is 183 × 42 × 36CM / 5PCS; reconfirm current packing when freight is quoted.

Workshop Comparison

For a trade enquiry, include required units, delivery location and photographs of the original component. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Buyer Questions

How should the model application be interpreted?

This front bumper-w / o wisp is listed for Hyundai Sonata ’04 / Sonata ’08. Use that designation as a starting point and verify the vehicle configuration before ordering.

How can an incorrect order be avoided?

Use the old component to check lamp or grille openings and upper edge alignment below the lamps. Also state the installation side or position in the enquiry.

How should a wholesale request be submitted?

For a trade enquiry, include required units, delivery location and photographs of the original component. Add vehicle details so availability and packing can be checked against the requested version.