64101-3K500 Panel for Hyundai Sonata ’04 / Sonata ’08

Panel for Hyundai Sonata ’04 / Sonata ’08: For repair planning, compare the pictured item with the original part before confirming an order. The component belongs to the body inspection group.

Product Specifications

Purchase Preparation

This panel is associated with Hyundai Sonata ’04 / Sonata ’08. If 64101-3K500 appears on the original label or casting, continue by confirming holes, clips and clearance. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Reference Check

• Wheel-arch or lamp clearance
• Opening and hole pattern
• Left or right orientation
• Panel contour
• Bolt and clip locations

A workshop estimator should measure wheel-arch or lamp clearance, inspect opening and hole pattern, and align bolt and clip locations before the purchase order is issued. This route applies to the panel shown for Hyundai Sonata ’04 / Sonata ’08.

If images accompany the enquiry, include an original-label photograph, an installation-opening picture, and a straight-on view. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

A workshop estimator can begin with original-label photograph to measure wheel-arch or lamp clearance. A second image should show left or right orientation from installation-opening picture. Before the purchase order is issued, inspect bolt and clip locations and note any difference from the removed component. Keep these observations with the Hyundai Sonata ’04 / Sonata ’08 vehicle record.

The repair planner should verify bolt and clip locations from a connector close-up, then cross-check bolt and clip locations before the purchase order is issued. The maintenance supervisor should review panel contour from a fixing-point close-up, then review left or right orientation before the stock request is released. A collision-repair specialist should inspect panel contour from a full component outline, then trace bolt and clip locations before the shipment is booked. A collision-repair specialist should compare left or right orientation from an original-label photograph, then evaluate wheel-arch or lamp clearance before the commercial request is submitted.

Supply Enquiry Details

Keep protective wrapping in place where possible until the item has passed the initial comparison. No packing entry is published here; request current carton and quantity information with the quotation.

Configuration Check

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Ordering FAQ

What is the listed vehicle application?

Application information points to Hyundai Sonata ’04 / Sonata ’08. A workshop should still compare the removed item and mounting location before ordering.

How can an incorrect order be avoided?

Review wheel-arch or lamp clearance first, then inspect left or right orientation on the vehicle. Clear photographs help the supplier assess the required version.

What information helps confirm availability?

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Keep each requested product on a separate line when several parts share one shipment.