86611-F2000 Upper of Rear Bumper for Hyundai Elantra ’16

Upper of Rear Bumper for Hyundai Elantra ’16: Review the identification points below before adding this component to a repair estimate. The component belongs to the bumper inspection group.

Product Specifications

Vehicle-Side Evidence

This upper of rear bumper is associated with Hyundai Elantra ’16. For purchasing documents, quote 86611-F2000 exactly and add the destination market and vehicle information. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Pre-Order Inspection

• Bracket and bolt-hole spacing
• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature

The procurement contact should note bracket and bolt-hole spacing, note lamp or grille openings, and inspect overall corner curvature before the delivery plan is confirmed. This route applies to the upper of rear bumper shown for Hyundai Elantra ’16.

If images accompany the enquiry, include a removed-part overview, a side-profile photograph, and a side-profile photograph. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

The procurement contact can begin with removed-part overview to note bracket and bolt-hole spacing. A second image should show side-retainer engagement from side-profile photograph. Before the delivery plan is confirmed, note overall corner curvature and note any difference from the removed component. Keep these observations with the Hyundai Elantra ’16 vehicle record.

A body-shop buyer should cross-check overall corner curvature from a vehicle-side photograph, then mark lamp or grille openings before the packing plan is prepared. The repair planner should photograph overall corner curvature from an adjacent-panel image, then trace side-retainer engagement before the replacement is test-positioned. The maintenance supervisor should measure upper edge alignment below the lamps from a full component outline, then trace bracket and bolt-hole spacing before the installation begins. The maintenance supervisor should document side-retainer engagement from a lower-retainer view, then verify bracket and bolt-hole spacing before the installation begins.

Purchase Preparation

Do not enlarge holes, bend brackets or force electrical plugs to compensate for a mismatch. No packing entry is published here; request current carton and quantity information with the quotation.

Buyer Verification Notes

Include packaging questions, requested quantity and the receiving country in the initial enquiry. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Purchase Questions

How should the model application be interpreted?

The recorded application is Hyundai Elantra ’16. Confirm trim, market specification and the removed upper of rear bumper before purchase.

How can an incorrect order be avoided?

Fitment evidence should show bracket and bolt-hole spacing, side-retainer engagement and the position where the component will be installed.

What should be included in a B2B enquiry?

Include packaging questions, requested quantity and the receiving country in the initial enquiry. The supplier can then review the product version, carton requirements and delivery options.