86530-3X210 Front Bumper Support for Hyundai Elantra ’14 / Elantra ’16

Front Bumper Support for Hyundai Elantra ’14 / Elantra ’16: Parts selection should begin with the removed component and the exact vehicle record. The component belongs to the bumper inspection group.

Product Specifications

Technical Comparison Notes

This front bumper support is associated with Hyundai Elantra ’14 / Elantra ’16. Use 86530-3X210 as the written lookup reference while also checking geometry and installation position. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Configuration Check

• Lamp or grille openings
• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing

A collision-repair specialist should note lamp or grille openings, inspect side-retainer engagement, and capture bracket and bolt-hole spacing before the packing plan is prepared. This route applies to the front bumper support shown for Hyundai Elantra ’14 / Elantra ’16.

If images accompany the enquiry, include a fixing-point close-up, a removed-part overview, and a fastener detail. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

A collision-repair specialist can begin with fixing-point close-up to note lamp or grille openings. A second image should show upper edge alignment below the lamps from removed-part overview. Before the packing plan is prepared, inspect bracket and bolt-hole spacing and note any difference from the removed component. Keep these observations with the Hyundai Elantra ’14 / Elantra ’16 vehicle record.

A collision-repair specialist should record bracket and bolt-hole spacing from a chassis-plate image, then record lamp or grille openings before the delivery plan is confirmed. The service adviser should inspect side-retainer engagement from a full component outline, then mark lamp or grille openings before the vehicle is dismantled. The service adviser should inspect upper edge alignment below the lamps from a side-profile photograph, then trace overall corner curvature before the stock request is released. The maintenance supervisor should document side-retainer engagement from a removed-part overview, then measure upper edge alignment below the lamps before the carton is allocated.

Application Review

Keep protective wrapping in place where possible until the item has passed the initial comparison. No packing entry is published here; request current carton and quantity information with the quotation.

Procurement Checklist

Distributors may request pricing by stating volume, destination and the vehicle identification data held. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Common Workshop Questions

Which Hyundai model does this page cover?

Application information points to Hyundai Elantra ’14 / Elantra ’16. A workshop should still compare the removed item and mounting location before ordering.

What should a workshop inspect before purchase?

Ask the workshop to inspect lamp or grille openings together with upper edge alignment below the lamps. VIN or chassis information can clarify market-specific differences.

What information helps confirm availability?

Distributors may request pricing by stating volume, destination and the vehicle identification data held. Keep each requested product on a separate line when several parts share one shipment.