92101-3X510 / 92102-3X510 Headlight Assembly (LED) for Hyundai Elantra ’11 / Elantra ’14

Headlight Assembly (LED) for Hyundai Elantra ’11 / Elantra ’14: Review the identification points below before adding this component to a repair estimate. The component belongs to the lighting inspection group.

Product Specifications

Configuration Check

This headlight assembly (led) is associated with Hyundai Elantra ’11 / Elantra ’14. Use 92101-3X510 / 92102-3X510 as the written lookup reference while also checking geometry and installation position. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Reference Check

• Electrical plug and pin layout
• Mounting tabs around the housing
• Left or right installation position
• Clearance beside bumper and grille
• Lens profile and outer edge

A collision-repair specialist should cross-check electrical plug and pin layout, compare mounting tabs around the housing, and confirm lens profile and outer edge before the installation begins. This route applies to the headlight assembly (led) shown for Hyundai Elantra ’11 / Elantra ’14.

If images accompany the enquiry, include a side-profile photograph, a straight-on view, and a rear mounting view. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

A collision-repair specialist can begin with side-profile photograph to cross-check electrical plug and pin layout. A second image should show left or right installation position from straight-on view. Before the installation begins, compare lens profile and outer edge and note any difference from the removed component. Keep these observations with the Hyundai Elantra ’11 / Elantra ’14 vehicle record.

The procurement contact should inspect left or right installation position from an installation-opening picture, then measure lens profile and outer edge before the quotation is approved. The service adviser should inspect clearance beside bumper and grille from an adjacent-panel image, then verify clearance beside bumper and grille before the vehicle is dismantled. The procurement contact should review left or right installation position from a chassis-plate image, then assess mounting tabs around the housing before the shipment is booked. A vehicle inspector should review clearance beside bumper and grille from an adjacent-panel image, then align clearance beside bumper and grille before the purchase order is issued.

Supply Enquiry Details

A qualified installer should resolve alignment or wiring differences before the vehicle returns to service. No packing entry is published here; request current carton and quantity information with the quotation.

Identification Summary

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Buyer Questions

What is the listed vehicle application?

This headlight assembly (led) is listed for Hyundai Elantra ’11 / Elantra ’14. Use that designation as a starting point and verify the vehicle configuration before ordering.

How can an incorrect order be avoided?

Photograph electrical plug and pin layout and the mounting area around left or right installation position. Combine those images with vehicle identification data for review.

What should a distributor send for a quotation?

Provide quantity, destination country and the clearest available vehicle details for a B2B quotation. Packing and freight can be discussed after the component version has been identified.