86511-2H000 Front Bumper for Hyundai Elantra ’07 / Elantra ’11

Front Bumper for Hyundai Elantra ’07 / Elantra ’11: This entry separates model application, physical checks and quotation details for easier review. The component belongs to the bumper inspection group.

Product Specifications

Application Review

This front bumper is associated with Hyundai Elantra ’07 / Elantra ’11. Reference matching begins with 86511-2H000; finish the check by examining the outline and fixing points. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Physical Fitment Points

• Side-retainer engagement
• Upper edge alignment below the lamps
• Overall corner curvature
• Bracket and bolt-hole spacing
• Lamp or grille openings

A body-shop buyer should mark side-retainer engagement, trace upper edge alignment below the lamps, and verify lamp or grille openings before the installation begins. This route applies to the front bumper shown for Hyundai Elantra ’07 / Elantra ’11.

If images accompany the enquiry, include an installation-opening picture, an installation-opening picture, and a vehicle-side photograph. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

A body-shop buyer can begin with installation-opening picture to mark side-retainer engagement. A second image should show overall corner curvature from installation-opening picture. Before the installation begins, trace lamp or grille openings and note any difference from the removed component. Keep these observations with the Hyundai Elantra ’07 / Elantra ’11 vehicle record.

The importing distributor should trace bracket and bolt-hole spacing from a removed-part overview, then assess side-retainer engagement before the shipment is booked. The procurement contact should cross-check upper edge alignment below the lamps from a full component outline, then document overall corner curvature before the packing plan is prepared. The parts coordinator should cross-check upper edge alignment below the lamps from an original-label photograph, then verify lamp or grille openings before the replacement is test-positioned. The installation team should compare bracket and bolt-hole spacing from a connector close-up, then confirm upper edge alignment below the lamps before the quotation is approved.

Fitment Evidence

Protect painted and finished surfaces during handling, and verify panel gaps before tightening fasteners. Recorded packing is 180 × 40 × 45CM / 5PCS; reconfirm current packing when freight is quoted.

Configuration Check

For a trade enquiry, include required units, delivery location and photographs of the original component. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Purchase Questions

What is the listed vehicle application?

This page associates the front bumper with Hyundai Elantra ’07 / Elantra ’11. The vehicle record and original component should agree with the pictured version.

Which details help confirm the correct version?

Ask the workshop to inspect side-retainer engagement together with overall corner curvature. VIN or chassis information can clarify market-specific differences.

What information is needed for a quotation?

For a trade enquiry, include required units, delivery location and photographs of the original component. Providing the vehicle record at the start reduces follow-up questions during quotation.