86811-2D500 / 86812-2D500 Inner Liner for Hyundai Elantra ’04

Inner Liner for Hyundai Elantra ’04: Match the item to the vehicle configuration before quantity and shipping terms are confirmed. The component belongs to the body inspection group.

Product Specifications

Physical Fitment Points

This inner liner is associated with Hyundai Elantra ’04. Write 86811-2D500 / 86812-2D500 on the inspection sheet and ask the workshop to confirm the same characters on the removed piece. Use the vehicle record and the removed component together; market specification or previous repairs may change the required version.

Supply Enquiry Details

• Bolt and clip locations
• Wheel-arch or lamp clearance
• Opening and hole pattern
• Left or right orientation
• Panel contour

A collision-repair specialist should measure bolt and clip locations, align wheel-arch or lamp clearance, and mark panel contour before the replacement is test-positioned. This route applies to the inner liner shown for Hyundai Elantra ’04.

If images accompany the enquiry, include a vehicle-side photograph, a full component outline, and an adjacent-panel image. Label the evidence with the product reference shown in the specification table so the workshop and purchasing team review one configuration.

A collision-repair specialist can begin with vehicle-side photograph to measure bolt and clip locations. A second image should show opening and hole pattern from full component outline. Before the replacement is test-positioned, align panel contour and note any difference from the removed component. Keep these observations with the Hyundai Elantra ’04 vehicle record.

The installation team should cross-check opening and hole pattern from an underside image, then review panel contour before the purchase order is issued. A workshop estimator should verify wheel-arch or lamp clearance from a removed-part overview, then mark opening and hole pattern before the packing plan is prepared. The service adviser should align wheel-arch or lamp clearance from a fixing-point close-up, then photograph opening and hole pattern before the carton is allocated. The installation team should confirm panel contour from a chassis-plate image, then review bolt and clip locations before the fitment decision is signed off.

Vehicle Confirmation

Confirm left and right orientation at the vehicle rather than relying on a mirrored product photograph. Recorded packing is 120 × 23 × 28CM / 10PCS; reconfirm current packing when freight is quoted.

Procurement Checklist

For a trade enquiry, include required units, delivery location and photographs of the original component. Ask the supplier to review availability, packing and delivery terms against the identified component rather than a generic model description.

Fitment FAQ

What model is associated with this replacement part?

The listing covers Hyundai Elantra ’04. Because configurations may vary, check the actual installation area before approving the inner liner.

What evidence is useful for a fitment review?

Check bolt and clip locations, confirm opening and hole pattern, and retain the removed part until the replacement has been compared side by side.

What should be included in a B2B enquiry?

For a trade enquiry, include required units, delivery location and photographs of the original component. Keep each requested product on a separate line when several parts share one shipment.